首页> 外文会议>International conference on physical and numerical simulation of material processing;ICPNS2010 >High temperature deformation behavior and microstructure preparation of Cu-Ni-Si-P alloy
【24h】

High temperature deformation behavior and microstructure preparation of Cu-Ni-Si-P alloy

机译:Cu-Ni-Si-P合金的高温变形行为及组织制备

获取原文

摘要

The hot deformation behavior of Cu-Ni-Si-P alloy have been investigated by means of isothermal compression tests on a Gleeble-1500D thermal-mechanical simulator in the temperature ranges of 873-1073 K and strain rate ranges of 0.01-5s~(-1). The results show that the dynamic recryatallization occurs in Cu-Ni-Si-P alloy during hot deformation. The peak stress during hot deformation can be described by the hyperbolic sine function. The influence of deformation temperature and strain rate on the peak stress can be represented using the Zener-Hollomon parameter. Moreover, the activation energy for hot deformation of Cu-Ni-Si-P alloy is determined to be 485.6 kJ / mol within the investigated ranges of deformation temperature and strain rate. The constitutive equation of the Cu-Ni-Si-P alloy is also established.
机译:通过在Gleeble-1500D热力机械模拟器上进行等温压缩试验,研究了Cu-Ni-Si-P合金的热变形行为,温度范围为873-1073 K,应变速率范围为0.01-5s〜( -1)。结果表明,Cu-Ni-Si-P合金在热变形过程中发生动态的再结晶。热变形过程中的峰值应力可以用双曲正弦函数来描述。变形温度和应变速率对峰值应力的影响可以使用齐纳-所罗门参数来表示。此外,在研究的变形温度和应变速率范围内,确定了Cu-Ni-Si-P合金热变形的活化能为485.6 kJ / mol。建立了Cu-Ni-Si-P合金的本构方程。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号