首页> 外文会议>CICC-7;China international conference on high-performance ceramics >Mechanical Properties of ZrO_2-LaMgAl_(11)O_(19) Ceramics
【24h】

Mechanical Properties of ZrO_2-LaMgAl_(11)O_(19) Ceramics

机译:ZrO_2-LaMgAl_(11)O_(19)陶瓷的力学性能

获取原文

摘要

ZrO_2 ceramics have been widely used in many fields with its excellent physical and chemical properties, but the mechanical properties of YSZ ceramics, especially the fracture toughness, decline caused by the failure of the phase transformation toughening at high temperature. In this investigation, plate-like LaMgAl_(11)O_(19) toughened ZrO_2 ceramics were prepared by pressureless sintering at 1550 °C for 3 h in air . The bulk density of the sintered samples are between 5.5 to 6.0 g/cm~3, and the relative density are above 93%. The mechanical properties of the ZrO_2-LaMgAl_(11)O_(19) ceramics were studied systematically at room temperature. The flexure strength and fracture toughness of ZrO_2-LaMgAl_(11)O_(19) ceramic are 811.8 MPa and 13.9 MPa·m~(1/2) with the LMA addition of 2 wt%.
机译:ZrO_2陶瓷以其优异的物理化学性能而被广泛应用于许多领域,但YSZ陶瓷的机械性能,尤其是断裂韧性,高温相变韧化失败引起的下降。在这项研究中,通过在空气中于1550°C无压力烧结3 h来制备板状LaMgAl_(11)O_(19)增韧的ZrO_2陶瓷。烧结后样品的堆积密度在5.5至6.0g / cm〜3之间,相对密度在93%以上。在室温下系统地研究了ZrO_2-LaMgAl_(11)O_(19)陶瓷的力学性能。 ZrO_2-LaMgAl_(11)O_(19)陶瓷的弯曲强度和断裂韧性分别为811.8 MPa和13.9 MPa·m〜(1/2),LMA添加量为2 wt%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号