PARAMETRIC STUDY OF LOW-SWIRL INJECTOR GEOMETRY ON ITS OPERABILITY

摘要

The low swirl injector (LSI) is a combustion technology being developed for low-emissions fuel-flexible gas turbines. The basic LSI configuration consists of an annulus of swirl vanes centered on a non-swirled channel, both of which allow for the passage of premixed reactants. LSIs are typically designed by following a general guidance of achieving a swirl number between 0.4 and 0.55. This paper aims to develop a more specific guideline by investigating the effects of varying geometry, i.e. vane angle, vane shape, and center channel size, on the LSI performance. A well-studied LSI provides a baseline for this investigation. Nine LSI variations from this baseline design have been evaluated. All LSI are tested with CH_4 fuel at bulk flow velocity of 8 to 20 m/s firing into the open atmosphere. Performance metrics are the lean blowoff limit, the pressure drop, flowfield characteristics and emissions. Results show that the lean blow-off limit and NO_X and CO emissions are insensitive to LSI geometric variations. The flowfields of seven LSIs exhibit self-similarity implying their turndown ranges are similar. Reducing the center channel size and/or the use of thin vanes instead of thickened vanes can reduce pressure drop across the LSI. Additionally, all ten LSI share a common feature in that 70% to 80% the premixture flows through the vane annulus. These findings are used to develop a more specific engineering guidelines for designing the LSI for gas turbines.