首页> 外文会议>Structures congress >ASCE/SEI Blast Shock and Impact Committee - Session for 2012 Structures Congress - 'New and Innovative Material for Blast Protection' Insulated Concrete Forms (ICF) as Blast-Resistant Barriers
【24h】

ASCE/SEI Blast Shock and Impact Committee - Session for 2012 Structures Congress - 'New and Innovative Material for Blast Protection' Insulated Concrete Forms (ICF) as Blast-Resistant Barriers

机译:ASCE / SEI爆炸冲击和冲击委员会-2012年结构大会会议-“用于爆炸保护的新型创新材料”绝缘混凝土模板(ICF)作为抗爆炸屏障

获取原文

摘要

Insulated Concrete Forms (ICF) have been used as residential and commercial building wall systems and in more recent years as floor and roof systems. The ICF consists of a reinforced concrete core formed between 2 panels of EPS (Expanded PolyStyrene foam) which acts as both permanent forms for the concrete core and the permanent insulation for the building. Typically only the concrete core with appropriate steel reinforcing is assumed to be the structural component of the building. Most of the ICF providers have load tables for resisting compression plus lateral pressure due to wind or seismic loads based on the thickness of the core and the amount and spacing of the steel reinforcement. Many building codes including the International Building Code (2009) include these materials in the chapters relating to concrete. FEMA 361 lists ICF as one of the materials to be used as a hurricane and tornado generated missile protection barrier with required core thicknesses depending on wind speed. This paper examines the possibility of the EPS foam panels contributing to the composite action of the ICF system to resist explosive blast loads. Both wind-generated missile impact tests and explosive blast tests have been conducted on ICF. The presence of the EPS outer form, which is usually about 2.5" thick, acts as a shock-absorbing cushion for both missile impact and the compression shock wave from an explosive blast. The plastic form ties that attach the inner EPS panel to the outer EPS panel restrains the hydro-static pressure of the uncured, wet concrete. These plastic ties and the inner EPS foam panel may also restrain any concrete fragments from penetrating into the interior of the building. This paper will summarize the results of these tests and present analytical evidence of the usefulness of not only the concrete core of the ICF, but also the EPS foam panels, as a blast-resistant barrier.
机译:隔热混凝土模板(ICF)已被用作住宅和商业建筑的墙体系统,并且近年来已用作地板和屋顶系统。 ICF由在两块EPS(膨胀聚苯乙烯泡沫)板之间形​​成的钢筋混凝土芯组成,既可作为混凝土芯的永久形式,又可作为建筑物的永久绝缘材料。通常,仅将具有适当钢筋的混凝土芯假定为建筑物的结构部件。大多数ICF提供者都具有载荷表,用于根据岩心的厚度以及钢筋的数量和间距来抵抗由于风或地震载荷引起的压缩和侧向压力。许多建筑规范(包括《国际建筑规范》(2009年))在与混凝土有关的章节中都包含了这些材料。 FEMA 361将ICF列为用作飓风和龙卷风产生的导弹保护屏障的材料之一,其所需的芯厚度取决于风速。本文研究了EPS泡沫板有助于ICF系统抵抗爆炸冲击的复合作用的可能性。在ICF上已进行了风力导弹的撞击试验和爆炸试验。 EPS外部形状的存在(通常约2.5英寸厚)可充当减震垫,既可用于导弹撞击,也可用于爆炸爆炸产生的压缩冲击波。塑料形式的扎带将内部EPS面板连接到外部EPS面板可抑制未固化的湿混凝土的静水压力,这些塑料扎带和EPS泡沫内面板还可以抑制任何混凝土碎片渗入建筑物内部,本文将总结这些测试的结果并提出建议。分析证据表明,不仅ICF的混凝土芯,而且EPS泡沫板作为防爆屏障都非常有用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号