首页> 外文会议>China international conference on high-performance ceramics >Preparation of Y2O3-Al2O3-ZrO2 Nano-ceramic Coatings on Metal Substrate by Sol-gel Method
【24h】

Preparation of Y2O3-Al2O3-ZrO2 Nano-ceramic Coatings on Metal Substrate by Sol-gel Method

机译:溶胶 - 凝胶法制备金属基材上的Y2O3-Al2O3-ZrO2纳米陶瓷涂层

获取原文

摘要

In this paper,Y2O3-Al2O3-ZrO2 nano-ceramic coatings were prepared on 316L stainless steel substrate at 600 °C for 0.5 hour by sol-gel method,using Y(NO3)3·6H2O,ZrO(NO3)·2H2O and Al(NO3)3·9H2O as raw materials,hexamethylenetetramine as catalyst.Phases and morphology of these coatings were characterized by XRD,SEM and EDS.Effect of heat treatment temperature on microstructure of the coatings was studied.Y2O3-Al2O3-ZrO2 coatings with grain size about 50nm tightly integrated with metal substrate after densely sintering at 600 °C.The grain sizes have grown up with increasing temperature.
机译:在本文中,通过溶胶 - 凝胶法在316L不锈钢基板上在316L不锈钢基板上制备Y2O3-Al2O3-ZrO2纳米陶瓷涂层,使用Y(NO 3)3·6H2O,ZRO(NO 3)·2H2O和AL (NO3)3·9H2O作为原料,六亚甲基四胺作为催化剂。通过XRD,SEM和EDS表征了这些涂层的形态和形态。热处理温度对涂层微观结构的影响。用晶粒的2 O 3-Al2O3-ZrO2涂层。大小约50nm与金属基材紧密地集成,在600℃下烧结后。晶粒尺寸随着温度的增加而生长。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号