首页> 外文会议>2010 IEEE International Ultrasonics Symposium >Ultrasound compatible RF ablation electrode design for catheter based guidance of RF ablation — In vivo results with thermal strain imaging
【24h】

Ultrasound compatible RF ablation electrode design for catheter based guidance of RF ablation — In vivo results with thermal strain imaging

机译:超声兼容的射频消融电极设计,用于基于导管的射频消融指导—热应变成像的体内结果

获取原文

摘要

Currently the feedback guidance of intracardiac radiofrequency ablation (RFA) is very limited, offering only a catheter electrode (not tissue) temperature estimation and a means to titrate radiofrequency (RF) power delivery to the tissue. Our “MicroLinear” (ML) forward imaging ultrasound catheter design, now at a true 9F (3mm) in size, has been optimized with several features to simultaneously permit a) high quality intracardiac steering and imaging, b) tracking of 3D position with electroanatomical mapping, c) RF ablation, and d) tissue thermal strain (TS) estimation for direct tissue temperature feedback. Two types of ML catheters have been built and tested in 3 porcine animal models. The first type, in its third generation, is based on a PZT transducer array; the second type, in its second generation, is based on a CMUT array with custom integrated interface circuitry. Both types of devices are true 9F in size and performed well in imaging tests in recent in vivo studies. Both the ML-PZT and ML-CMUT arrays, as described previously, have a fine pitch (65 and 63 micron respectively) 24 element phased arrays operating at 14 MHz which project a B-mode plane directly out from the tip of the catheter. Intracardiac imaging performance was documented to show that the very small array apertures of the ML design (1.2mm × 1.58mm, and 1.1mm × 1.4mm) permit good, high resolution imaging to depths as great as 4 cm. The ML-PZT catheter was equipped with a special low profile ablation tip which allowed simultaneous imaging and ablation at the distal end of the catheter. TS data were acquired during tissue ablations in right atrium (RA) and right ventricle (RV). The TS data of the RF ablations were processed off line. In vivo use of this new technology has shown for the first time the very substantial potential for a single, low profile catheter to simultaneously image within the heart and perform intracardiac ablation therapy with tissue temperatu--re guidance produced from the incorporation of TS imaging. Work is underway to further assess the temperature estimation accuracy and to integrate the TS processing for real time displays.
机译:当前,心脏内射频消融(RFA)的反馈指导非常有限,仅提供导管电极(而非组织)温度估算值和滴定向组织的射频(RF)功率传递的手段。我们的“ MicroLinear”(ML)前向成像超声导管设计现已达到真正的9F(3mm)尺寸,并通过多项功能进行了优化,以同时允许a)高质量的心内转向和成像,b)通过电解剖学跟踪3D位置映射,c)射频消融和d)用于组织直接温度反馈的组织热应变(TS)估算。已经建立了两种类型的ML导管,并在3种猪的动物模型中对其进行了测试。第三种是第三代,基于PZT换能器阵列。第二种是第二代,基于具有定制集成接口电路的CMUT阵列。两种类型的设备的尺寸均为9F,在最近的体内研究中的成像测试中表现良好。如前所述,ML-PZT和ML-CMUT阵列均具有工作在14 MHz的细间距(分别为65微米和63微米)的24个元件相控阵列,这些阵列直接从导管尖端伸出B模式平面。记录的心内成像性能表明,ML设计的非常小的阵列孔径(1.2mm×1.58mm和1.1mm×1.4mm)可实现高达4 cm深度的良好高分辨率成像。 ML-PZT导管配有特殊的薄型消融头,可在导管的远端同时进行成像和消融。在右心房(RA)和右心室(RV)的组织消融期间获取TS数据。射频消融的TS数据是离线处理的。这项新技术的体内应用首次显示了单个低剖面导管在心脏内同时成像并进行组织性气化的心脏内消融治疗的巨大潜力。 -- 通过合并TS成像产生的重新指导。目前正在进行进一步评估温度估算精度并集成TS处理以进行实时显示的工作。

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号