首页> 外文会议>2010 International Conference on Measuring Technology and Mechatronics Automation >Influence of LSEG Content on Tribological Behaviors of PTFE/LSEG Composites under Dry Sliding Condition
【24h】

Influence of LSEG Content on Tribological Behaviors of PTFE/LSEG Composites under Dry Sliding Condition

机译:LSEG含量对干滑条件下PTFE / LSEG复合材料摩擦学性能的影响

获取原文
获取外文期刊封面目录资料

摘要

This paper provides a PTFE/LSEG solid self lubricating composite that exhibits very low friction coefficient and wear rate. In present study, the influences of the content of expanded graphite with nanoscale lamellar-structure (LSEG) in PTFE/LSEG composite on tribological properties were carried out. Six compounds of PTFE with LSEG (0~30 wt. %) were evaluated on MMU-5G friction and wear tester. The wear tests were conducted at a nominal contact pressure of 2.85MPa and a sliding speed of 0.48m/s. The transfer film formed on the mating surface and worn surface of PTFE/LSEG composite were observed using a scanning electron microscope (SEM) and a confocal laser scanning microscope (CLSM). The results show that the friction coefficient and wear rate could be obviously reduced because of the addition of LSEG into PTFE matrix. Compared with that of neat PTFE, wear resistance of PTFE/LSEG composite increased by 31.6 times. The images of CLSM and SEM indicate that the transfer film generated on the surface of mating pair is likely responsible for the low wear rate observed in these experiments.
机译:本文提供了一种PTFE / LSEG固体自润滑复合材料,该复合材料具有极低的摩擦系数和磨损率。本文研究了PTFE / LSEG复合材料中纳米级片状结构(LSEG)膨胀石墨含量对摩擦学性能的影响。在MMU-5G摩擦磨损测试仪上评估了PTFE与LSEG(0〜30 wt。%)的6种化合物。磨损测试是在2.85MPa的额定接触压力和0.48m / s的滑动速度下进行的。使用扫描电子显微镜(SEM)和共聚焦激光扫描显微镜(CLSM)观察在PTFE / LSEG复合材料的配合表面和磨损表面上形成的转移膜。结果表明,在聚四氟乙烯基体中加入低烟无卤可显着降低摩擦系数和磨损率。与纯PTFE相比,PTFE / LSEG复合材料的耐磨性提高了31.6倍。 CLSM和SEM的图像表明,在配对表面上生成的转移膜可能是造成这些实验中观察到的低磨损率的原因。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号