PARAMETRIC STUDY OF EMISSIONS FROM LOW CALORIFIC VALUE SYNGAS COMBUSTION, WITH VARIATION OF FUEL DISTRIBUTION, IN A PROTOTYPE THREE SECTOR BURNER

摘要

The emission composition is measured for a prototype burner while varying the equivalence ratio in discrete portions of the burner. The burner is a three sector system, consisting of a separate igniter, pilot/stabilizer and main burner. The design allows for discrete control of equivalence ratio in each of the three sectors. The ignition sector, designated RPL (Rich-Pilot-Lean), operates from rich to lean equivalence values, and serves to ignite the pilot sector, which, in turn, stabilizes the main combustion sector. All three burner sections are premixed. The burner is operated at atmospheric pressure with inlet flows heated to 650 K (±8 K). Tests were performed for three gases: methane, a model syngas (10% CH_4, 22.5% CO, 67.5% H_2), and dilute syngas. The dilute gas includes sufficient nitrogen to lower the heating value to 15 MJ/m3. The model syngas and diluted syngas are representative of fuels produced by gasification process. The burner emissions, specifically, CO, CO_2, O_2 and NO*, are measured while holding the RPL equivalence value constant and varying the equivalence ratio of the pilot and main sectors. The equivalence ratios for pilot and main sectors are chosen such that the total burner equivalence ratios remain constant during a test sequence. The target total equivalence ratio for each gas is chosen such that all experiments should have the same flame temperature.