首页> 外文会议>Wear of Materials >Friction and wear properties of UHMWPE/Al_2O_3 ceramic under different lubricating conditions
【24h】

Friction and wear properties of UHMWPE/Al_2O_3 ceramic under different lubricating conditions

机译:UHMWPE / Al_2O_3陶瓷在不同润滑条件下的摩擦磨损性能

获取原文

摘要

Friction and wear behavior of ultra-high molecular weight polyethylene (UHMWPE) sliding against Al_2O_3 ceramic under dry sliding, and lubrication of fresh plasma, distilled water and physiological saline were investigated with a self-made pin-on-disk apparatus at 37 +- 1°C. The worn surfaces were examined with a scanning electron microscope (SEM). The results show that the friction behavior of UHMWPE is very sensitive to its water absorption state. The wear rate of UHMWPE under dry sliding is the highest and under plasma lubrication is the lowest. The wear mechanisms are different under dry friction and various lubricating conditions.
机译:超高分子量聚乙烯(UHMWPE)在干滑动条件下在Al_2O_3陶瓷上滑动的摩擦和磨损行为,并用自制的针盘装置在37 +-温度下研究新鲜血浆,蒸馏水和生理盐水的润滑1℃。用扫描电子显微镜(SEM)检查磨损的表面。结果表明,超高分子量聚乙烯的摩擦行为对其吸水状态非常敏感。 UHMWPE在干滑下的磨损率最高,而在等离子润滑下的磨损率最低。在干摩擦和各种润滑条件下,磨损机理是不同的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号