The Altair Centrifugal Jig is an enhanced gravity technology, whose suitability for fine coal cleaning has been demonstrated through an in-plant study as reported in this publication. A relatively low specific gravity cut-point of 1.50 with a probable error value of 0.11 over a wide particle size range of 1 mm × 45 micron is indicative of the excellent separation performance achievable from the Altair Jig. Tests were performed with and without ragging material with the goal that the latter would provide enhanced throughput capacities. However, although the performance was close to the theoretical limits over the broad range of product grades generated, the no ragging experiments resulted in a significant loss in coal recovery under the given conditions. Overall, the centrifugal jig achieved 80% ash rejection and 50% total sulfur rejection while recovering nearing 80% of the combustibles.
展开▼