Snap Tie Cones Made From Recycled PET and HDPE

摘要

To address the growing environmental concern, Santa Clara University's Plastics Recycling Laboratory chose a relatively inexpensive product with low structural demands to open a new market for 100% recycled material products. Snap tie cones, used in construction to space wall forms prior to pouring the concrete, were injection molded from recycled PET and HDPE and tested against the cones used in industry made from HIPS. Four tests- dimensional checks, compression, impact, and creep- were designed and conducted. The commercial cones along with ones made of recycled PET and HDPE were tested before and after ultraviolet (UV) exposure. The data analysis shows that the recycled PET cones outperform their industry counterpart, while recycled HDPE did not perform as well. This leads to the conclusion that recycled PET is a viable alternative to HIPS in this application.