首页> 外文会议>Symposium on optical materials for high-power lasers >Ultraviolet laser damage and optical properties of high-refractive-index single layers multiple layers and high/low index multilayer stacks
【24h】

Ultraviolet laser damage and optical properties of high-refractive-index single layers multiple layers and high/low index multilayer stacks

机译:高折射率单层多层和高/低折射率多层堆叠的紫外激光损伤和光学性能

获取原文

摘要

Abstract: Laser induced damage thresholds, measured using N-on-1 and R-on-1 testing, of single layer high index zirconia and hafnia coatings, derived from nitric or acetic acid stabilized sol-gel processing, are reported. Single layer acetic acid, nitric acid and base catalyzed silica sol-gel coatings have also been tested. The sol-gels were dip coated onto fused silica substrates at a rate of 3mm/s. The refractive index of the materials were measured using transmission spectra of multiple pairs of high and low refractive index materials. Absorption in the UV region was similarly measured with multiple layers of the same material and fitting to a Beer's law behavior. The high index materials used were zirconia or hafnia, the low index material was silica. The compatibility of the various combinations of high and low index materials for physical stacking without cracking, achieving high reflectivity and high damage thresholds are discussed and compared. !10
机译:摘要:报道了使用N-on-1和R-on-1测试测量的源自硝酸或乙酸稳定溶胶-凝胶工艺的单层高折射率氧化锆和氧化f涂层的激光诱导损伤阈值。还已经测试了单层乙酸,硝酸和碱催化的二氧化硅溶胶-凝胶涂料。将溶胶-凝胶以3mm / s的速率浸涂到熔融的二氧化硅基底上。使用多对高和低折射率材料的透射光谱测量材料的折射率。类似地,使用相同材料的多个层并符合比尔定律的行为来测量紫外线区域中的吸收。使用的高折射率材料是氧化锆或氧化f,低折射率材料是二氧化硅。讨论并比较了高折射率材料和低折射率材料的各种组合在不破裂的情况下的物理相容性,不产生裂纹,实现了高反射率和高损伤阈值。 !10

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号