Manufacturing systems are very complicated, so it is very difficult to grasp the actual behaviour of the manufacturing processes in detail. Even if we obtain a new idea of the scheduling algorithm or the process layout, it takes a long time until the idea is put into practical use, because it is difficult to prove the actual validity of the idea.
The simulation technique is valid to solve this bottleneck. However, the conventional simulators lack the ability to simultaneously simulate the material flows and the control systems' behaviour.
In this papers, the authors analyze the functions of manufacturing system in the following factors:
(a) equipment layout (b) control system, (c) material, (d) operation. According to the analysis, we present a new type simulator which is named "MAFLOS&rdquo.
MAFLOS is characterized by the following features.
(a) MAFLOS has seven kinds of unit-element to describe the equipment layout of the manufacturing system. The simulationmodel is therefore generated by combining these unit-element.
(b) MAFLOS can simultaneously simulate the material flow and the control system behaviour.
制造系统非常复杂,因此很难详细掌握制造过程的实际行为。即使我们获得了有关调度算法或流程布局的新想法,由于将难以证明该想法的实际有效性,因此将该想法付诸实践还需要很长时间。 P>
仿真技术可有效解决此瓶颈。但是,传统的仿真器缺乏同时仿真物料流和控制系统行为的能力。 P>
本文从以下几个方面对制造系统的功能进行了分析: P>
(a)设备布局(b)控制系统,(c)材料,(d)操作。根据分析,我们提出了一种新型的模拟器,名为“ MAFLOS”。 P>
MAFLOS具有以下特征。 P>
(a)MAFLOS具有七种单位元素来描述制造系统的设备布局。因此,通过组合这些单元元素来生成仿真模型。 P>
(b)MAFLOS可以同时模拟物料流和控制系统行为。 P>
机译:iCoSim-FMS:用于复杂柔性制造系统的自适应控制的智能协同模拟器
机译:制造仿真器开发的框架:面向新一代仿真系统
机译:制造仿真器开发的框架:面向新一代仿真系统
机译:用于生产,设备和人力计划的通用生产线模拟器系统
机译:使用广义随机Petri网的自动化制造系统的性能评估。
机译:工程添加剂制造和模塑技术以创造栩栩如生的威利斯的圈子模拟器与动脉瘤进行培训神经外科
机译:离散和连续的系统模拟器:PNTBLSIM在制造系统中的应用
机译:工具接头制造系统的GEms(广义制造模拟器)模型:工业应用