首页> 外文会议> >Study of feasible trajectory generation algorithms for control of planar mobile robots
【24h】

Study of feasible trajectory generation algorithms for control of planar mobile robots

机译:用于平面移动机器人控制的可行轨迹生成算法研究

获取原文

摘要

For achieving acceptable control performance and execution efficiency of planar mobile robots, certain suitable trajectories are generated in real-time under the constraints of robot dynamics and associated environment. In this paper, three trajectory generation approaches, namely the "line", "arc-line", "B-spline" algorithms, for planar mobile robots are studied. For the "line" trajectory, the robot should rotate at the start and target points. Hence, they are only suitable for holonomic robots. The second set of trajectories generated by the "arc-line" algorithm are composed of several line and arc segments and might have discontinuous curvature at the transition points among these lines and arcs. The third set of trajectories generated by the B-spline algorithms could have continuous curvature. All the reference trajectories generated by these three algorithms are experimentally tested and compared on one actual mobile robot
机译:为了获得平面移动机器人可接受的控制性能和执行效率,在机器人动力学和相关环境的约束下实时生成某些合适的轨迹。本文研究了平面移动机器人的三种轨迹生成方法,即“线”,“弧线”,“ B样条”算法。对于“直线”轨迹,机器人应在起点和目标点旋转。因此,它们仅适用于完整的机器人。由“弧线”算法生成的第二组轨迹由几个线段和弧段组成,并且在这些线段和弧段之间的过渡点处可能具有不连续的曲率。由B样条算法生成的第三组轨迹可能具有连续曲率。由这三种算法生成的所有参考轨迹都经过实验测试,并在一个实际的移动机器人上进行了比较

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号