首页> 外文会议> >The optimum conditions of crystal structure parameters on Y/sub 1/Ba/sub 2/Cu/sub 3/O/sub 7-y/ superconductor with RIETAN simulation
【24h】

The optimum conditions of crystal structure parameters on Y/sub 1/Ba/sub 2/Cu/sub 3/O/sub 7-y/ superconductor with RIETAN simulation

机译:RIETAN模拟的Y / sub 1 / Ba / sub 2 / Cu / sub 3 / O / sub 7-y /超导体上晶体结构参数的最佳条件

获取原文

摘要

In this paper, we have tried to find the optimum conditions of crystal structure parameters on YBCO high T/sub c/ oxide-superconductor. The superconductor sample was made by examined for the optimization of parameters through Rietveld analysis with the input data from the XRD patterns. From the simulation of the initial parameter, the factors such as scale factor(s), zero point shift(z), and the Full width Half Maximum (FWHM) values (U, V, W) are s=2.0827E-3, z=0.2146, and U=4.2716E-2. V=1.7983E-2, and W=2.6768E-2. By the above data, we have obtained the optimized results for YBCO complex materials. Therefore, R values were refined as follows, R/sub WP/=8.83[%], R/sub P/=6.47[%], R/sub 1/=7.19[%], and R/sub E/=3.76[%], respectively.
机译:在本文中,我们试图找到YBCO高T / sub c /氧化物超导体上晶体结构参数的最佳条件。超导体样品是通过Rietveld分析并利用来自XRD图样的输入数据检查参数是否最优化而制成的。从初始参数的模拟中,诸如比例因子,零点偏移(z)和半角全宽(FWHM)值(U,V,W)之类的因子为s = 2.0827E-3, z = 0.2146,U = 4.2716E-2。 V = 1.7983E-2,W = 2.6768E-2。通过以上数据,我们获得了YBCO复合材料的优化结果。因此,将R值细化如下,R / sub WP / = 8.83 [%],R / sub P / = 6.47 [%],R / sub 1 / = 7.19 [%]和R / sub E / = 3.76。 [%], 分别。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号