首页> 外文会议> >The design of windows-based software for a PC-based, low-cost radar video signal generator
【24h】

The design of windows-based software for a PC-based, low-cost radar video signal generator

机译:基于PC的低成本雷达视频信号发生器的基于Windows的软件设计

获取原文
获取外文期刊封面目录资料

摘要

In the field of electronic warfare (EW), the development, test, validation, and debugging of radar warning receiver (RWR) hardware and software in the laboratory necessitates the simulation of radar threat signals. This requirement often leads to the development of expensive, high-fidelity, radio frequency (RF) simulators. Because they are expensive, they are scarce. They are also often hard to configure, operate, maintain, and relocate. Moreover, they are frequently in heavy demand, and engineers can rarely utilize them for lower priority, everyday design and debugging tasks. This paper describes a software program that is used in conjunction with a PC-based, low-cost (>$2500 parts cost) radar video signal generator (VSG) circuit-card assembly to provide scan-modulated pulse waveform data in the video domain. Although this software/hardware system cannot replace large scale simulators for complete or formal validation testing, it provides an inexpensive, easy-to-use, transportable tool to support engineering and debugging tasks. The VSG card software was written in Microsoft Visual Basic and makes extensive use of Microsoft Windows graphical user-interface features. The software allows the user to load selected channels with waveform data; to start and stop waveform generation; to direct waveforms to any of twenty outputs (four quadrants, five frequency bands); to load scenarios consisting of multiple waveforms into channels; and to load and execute dynamic waveform scripts. These capabilities, along with utilities that allow the user to edit waveform and scenario files and the VSG hardware itself, provide the user with an effective signal-generation suite that in some cases can completely eliminate the need for an RF simulator. The VSG software and hardware were designed and are in use at the Georgia Tech Research Institute as part of an effort for Wright Laboratory to improve and enhance test tools available for the evaluation of radar warning receivers.
机译:在电子战(EW)领域,实验室中雷达预警接收器(RWR)硬件和软件的开发,测试,验证和调试需要对雷达威胁信号进行仿真。这种要求通常导致开发昂贵的高保真射频(RF)模拟器。由于价格昂贵,因此稀缺。它们通常也很难配置,操作,维护和重新定位。而且,它们的需求量很大,工程师很少能将它们用于优先级较低的日常设计和调试任务。本文介绍了一种软件程序,该程序可与基于PC的低成本(> 2500美元零件成本)雷达视频信号发生器(VSG)电路卡组件结合使用,以提供视频域中的扫描调制脉冲波形数据。尽管此软件/硬件系统无法代替大规模模拟器进行完整或正式的验证测试,但它提供了一种廉价,易于使用的可移植工具,可支持工程和调试任务。 VSG卡软件是用Microsoft Visual Basic编写的,并广泛使用Microsoft Windows图形用户界面功能。该软件允许用户向选定的通道加载波形数据。开始和停止波形生成;将波形引导至二十个输出中的任何一个(四个象限,五个频带);将包含多个波形的场景加载到通道中;并加载和执行动态波形脚本。这些功能以及允许用户编辑波形和脚本文件以及VSG硬件本身的实用程序,为用户提供了有效的信号生成套件,在某些情况下可以完全消除对RF模拟器的需求。 VSG软件和硬件的设计和使用是在佐治亚理工学院进行的,这是赖特实验室改进和增强可用于评估雷达警告接收器的测试工具的一部分。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号