The welding characteristics of large metal place specimens using an ultrasonic butt welding system with a 15-kHz large capacity vibration source are studied. The vibration source has eight 15-kHz bolt-clamped Langevin-type lead zirconate titanate (PZT) transducers of 60-mm diameter driven by a 50- or 100-kW static induction thyristor power amplifier. Aluminium plates of 6-mm thickness and 100-mm to 400-mm width are successfully joined end-to-end by changing welding tip driving positions. The required input power is about 2.2 kW/cm/sup 2/. Aluminium and copper plate specimens were also joined successfully by about 4 kW/cm/sup 2/ input power.
展开▼
机译:研究了使用具有15 kHz大容量振动源的超声对焊系统对大型金属试样的焊接特性。振动源有8个15-kHz螺栓固定的Langevin型锆钛酸铅(PZT)传感器,直径为60 mm,由50或100 kW静态感应晶闸管功率放大器驱动。厚度为6毫米,宽度为100毫米至400毫米的铝板通过改变焊接头的驱动位置而成功地首尾相连。所需的输入功率约为2.2 kW / cm / sup 2 /。铝和铜板试样也以大约4 kW / cm / sup 2 /输入功率成功连接。
展开▼