首页> 外文会议> >The influence of using fluoropolymer based processin gadditives to improve the extrusion of high viscosity LLDPE reesins through narrow die configurations

【24h】

The influence of using fluoropolymer based processin gadditives to improve the extrusion of high viscosity LLDPE reesins through narrow die configurations

机译：使用含氟聚合物的加工助剂通过窄口模配置来改善高粘度LLDPE树脂挤出的影响

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

the influence of using the fluoropolymer based polymer processing additive (PPA) DYNAMAR~TM FX -5920 A to improve the extrusion of high viscosity linear low density polyethylene (LLDPE) resins in a blown film extrusion process has been investigated.

机译：研究了在吹膜挤出工艺中使用含氟聚合物基聚合物加工添加剂（PPA）DYNAMAR〜TM FX -5920 A改善高粘度线性低密度聚乙烯（LLDPE）树脂挤出的影响。

著录项

来源
《》|1998年|p.1219-1233|共15页
会议地点
作者
Eric W.Adair; John Horns;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类轻工业、手工业;
关键词

相似文献

外文文献
中文文献
专利

1. Influence of the nature of fluoropolymer processing aids on the elimination of sharkskin defect in LLDPE extrusion [J] . C. Dubrocq-Baritaud, N. Devaux, E. Darque-Ceretti, International Journal of Material Forming . 2008,第s1期

机译：含氟聚合物加工助剂的性质对消除LLDPE挤出中的鲨鱼皮缺陷的影响
2. Influence of die surface on the efficiency of fluoropolymer processing aids during the extrusion of linear-low density polyethylene [J] . Dubrocq-Baritaud C., Darque-Ceretti E., Vergnes B. Journal of Non-Newtonian Fluid Mechanics . 2011,第14a15期

机译：线性低密度聚乙烯挤出过程中模具表面对含氟聚合物加工助剂效率的影响
3. Finite element modelling investigation upon the influence of pocket die designs on metal flow in aluminium extrusion - Part II. effect of pocket geometry configurations on metal flow [J] . Q. Li, C. J. Smith, C. Harris, Journal of Materials Processing Technology . 2003,第2a3期

机译：铝型材中袋型模具设计对金属流动的影响的有限元建模研究-第二部分型腔几何形状对金属流动的影响
4. The influence of using fluoropolymer based processin gadditives to improve the extrusion of high viscosity LLDPE reesins through narrow die configurations [C] . Eric W.Adair, John Horns TAPPI polymers, laminations coatings conference . 1998

机译：使用含氟聚合物的处理钆改善高粘度LLDPE Reesins挤出的影响
5. Effects of Uneven Die Gap on the Tensile Properties of LLDPE/LDPE Blown Film Extrusion [D] . ?Hanson, H. Kenneth, III 2020

机译：不均匀模间隙对LLDPE / LDPE吹膜挤压的拉伸性能的影响
6. Influence of processing conditions on apparent viscosity and system parameters during extrusion of distillers dried grains‐based snacks [O] . Poonam Singha, Kasiviswanathan Muthukumarappan, Padmanaban Krishnan 2018

机译：酒糟类零食膨化过程中加工条件对表观粘度和系统参数的影响
7. Influence of the nature of fluoropolymer processing aids on the elimination of sharkskin defect in LLDPE extrusion [O] . Dubrocq-Baritaud Claire, Devaux Nicolas, Darque-Ceretti Evelyne, 2008

机译：含氟聚合物加工助剂的性质对消除LLDPE挤出中的鲨鱼皮缺陷的影响
8. An experimental investigation of the influence of base bleed on the base drag of various propelling nozzle configurations [R] . J. B. Roberts, G. T. Golesworthy 1966

机译：基础排水对各种推进喷嘴结构基础阻力影响的实验研究

The influence of using fluoropolymer based processin gadditives to improve the extrusion of high viscosity LLDPE reesins through narrow die configurations

摘要

著录项

相似文献

相关主题

期刊订阅