首页> 外文会议> >MONODISPERSED ULTRAFINE ZEOLITE CRYSTAL PARTICLES BY MICROWAVE HYDROTHERMAL SYNTHESIS
【24h】

MONODISPERSED ULTRAFINE ZEOLITE CRYSTAL PARTICLES BY MICROWAVE HYDROTHERMAL SYNTHESIS

机译:微波水热合成单分散超细沸石晶体颗粒。

获取原文
获取原文并翻译 | 示例

摘要

Monodispersed ultrafme crystal particles of zeolite (Silicalite-1) have been synthesized in batch reactor vessels by microwave irradiation heating of aqueous basic silicate precursor solutions with tetra propyl ammonium hydroxide as the templating molecule. The effects of major process parameters (such as synthesis temperature, microwave heating rate, volume ratio (i.e., the volume of the initial synthesis solution relative to the total volume of the reactor vessel), and synthesis time on the zeolite particle characteristics are studied using a computer-controlled microwave reactor system that allows real-time monitoring and control of reaction medium temperature. The changes in the morphology, size and crystal structure of the particles are investigated using scanning electron microscope, dynamic light scattering, X-ray diffraction, and BET surface analysis. We have found that the synthesis temperature, volume ratio, and heating rate play a significant role in controlling the particle size, uniformity, and morphology. Microwave processing has generated morphologies of zeolite particles (i.e., uniform block-shaped particles that contain mixed gel-nanocrystallites and agglomerated crystal particles) that are not typically made by conventional hydrothermal processes. At higher synthesis temperatures and lower volume ratios, irregular block-shaped particles were produced, whereas increasing the volume ratio promoted the formation of monodispersed single-crystal particles with uniform shape. Our results clearly demonstrate that faster microwave heating is advantageous to enhance the zeolite crystallization kinetics and produces larger-size crystal particles in shorter time. In addition, zeolite crystallization mechanisms, depending on the microwave heating rate, are also discussed.
机译:沸石(Silicalite-1)的单分散超细晶体颗粒是通过以四丙基氢氧化铵为模板分子的碱性硅酸盐水溶液的微波辐射加热在间歇反应器中合成的。研究了主要工艺参数(如合成温度,微波加热速率,体积比(即初始合成溶液的体积相对于反应器容器总体积))和合成时间对沸石颗粒特性的影响。计算机控制的微波反应器系统,可以实时监测和控制反应介质的温度,使用扫描电子显微镜,动态光散射,X射线衍射和X射线衍射研究了颗粒的形态,大小和晶体结构的变化。 BET表面分析:我们发现合成温度,体积比和加热速率在控制粒径,均匀度和形态方面起着重要作用,微波处理产生了沸石颗粒的形态(即均匀的块状颗粒,包含混合的凝胶-纳米微晶和团聚的晶体颗粒),通常不是由Conventio制造的最终的热液过程。在较高的合成温度和较低的体积比下,产生了不规则的块状颗粒,而增加体积比则促进了形状均匀的单分散单晶颗粒的形成。我们的结果清楚地表明,更快的微波加热有利于增强沸石的结晶动力学,并在较短的时间内产生较大尺寸的晶体颗粒。另外,还讨论了取决于微波加热速率的沸石结晶机理。

著录项

  • 来源
    《》|2008年|P.91-109|共19页
  • 会议地点 Pittsburgh PA(US);Pittsburgh PA(US)
  • 作者单位

    Oak Ridge National Laboratory, Oak Ridge, TN 37831-6181;

    Department of Chemical Engineering, University of Maryland, College Park, MD 20742;

    Department of Chemical Engineering, Purdue University, Lafayette, IN 47905;

  • 会议组织
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类 工程材料一般性问题;
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号