首页> 外文会议>Infrared sensors, devices, and applications; and Single photon imaging II >eSNR Improvement in Indirect Detection of mid-IR Signals by Wavelength Conversion in SOS Waveguides
【24h】

eSNR Improvement in Indirect Detection of mid-IR Signals by Wavelength Conversion in SOS Waveguides

机译:通过SOS波导中的波长转换间接检测中红外信号的eSNR改善

获取原文
获取原文并翻译 | 示例

摘要

With a transparency window up to 6 μm, sapphire can serve as a platform to support silicon photonic integrated circuit in MWIR. Planar waveguide devices based on silicon-on-sapphire (SOS) are emerging as a bridge between MWTR and SWIR through frequency band conversion process. While these devices are widely proposed to amplify MWIR signals and generate MWIR source, it can also be inversely utilized to achieve MWIR light detection. Here MWIR signals are down-converted to telecommunication wavelength (1.55 μm) through SOS waveguides and indirectly detected by SWIR detectors. Since detectors at telecommunication wavelengths exhibit superior performances in terms of speed, noise and sensitivity, the indirect detection scheme can be a promising candidate to improve the detection performance. In this report, we analyze performance of the indirect detection of MWIR signals by wavelength conversion in SOS waveguides. Particularly we modeled and compared the noise performance of the indirect detection with direct detection using state-of-the-art MWIR detectors. We show that, in addition to advantages of room temperature and high speed operation, the proposed indirect detection can improve the electrical signal-to-noise ratio up to 50dB, 23dB and 4dB compared to direct detection by PbSe, HgCdTe and InSb detectors respectively. The improvement is more pronounced in detection of weak MWIR signals.
机译:蓝宝石具有高达6μm的透明窗口,可以用作支持MWIR中的硅光子集成电路的平台。通过频带转换工艺,基于蓝宝石硅(SOS)的平面波导器件正在成为MWTR和SWIR之间的桥梁。虽然这些设备被广泛提出来放大MWIR信号并产生MWIR源,但它也可以反过来用于实现MWIR光检测。此处,MWIR信号通过SOS波导下变频为电信波长(1.55μm),并由SWIR检测器间接检测。由于电信波长的检测器在速度,噪声和灵敏度方面均表现出卓越的性能,因此间接检测方案可以成为提高检测性能的有前途的候选方案。在此报告中,我们分析了通过SOS波导中的波长转换间接检测MWIR信号的性能。特别是,我们对间接检测的噪声性能进行了建模,并与使用最新MWIR检测器的直接检测进行了比较。我们显示,除了在室温和高速操作下的优势之外,与分别通过PbSe,HgCdTe和InSb检测器进行直接检测相比,所提出的间接检测可以将电信噪比提高高达50dB,23dB和4dB。在检测弱MWIR信号方面,这种改进更为明显。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号