Comparison Between 3D Eddy Current Patterns In Tokamak In-vessel Components Generated By Disruptions

摘要

During plasma disruption events in Tokamaks, a large amount of magnetic energy is associated to the transfer of plasma current into eddy currents in the passive structures. In the ITER programme two design concepts have been proposed. One approach (ITER CDA design) is based on copper stabilization loops (i.e. twin loops) attached to box-shaped blanket segments, electrically and mechanically separeted along the toroidal direction. For another design concept (ITER EDA design) based on lower plasma elongation there is no need for specific stabilization loops. The passive stabilization is obtained by toroidaly continuous components (i.e. the plasma facing wall of the blanket segments allows a continuity along the toroidal direction). Consequently, toroidal currents flow, when electromagnetic transients occur. Electromagnetic loads appear in the blanket structures in case of plasma disruptions and / or vertical displacement events either for the ITER CDA design concept or for the ITER EDA design concept. In this paper the influence of the in-vessel design configuration concepts - insulated segments or electrically continuous structures - in terms of magnetic shielding and electric insulation on the magnitude and the flow pattern of the eddy currents is investigated. This investigation will allow a performance evaluation of the two proposed design concepts.