【24h】

FLOW PATTERNS AND PRESSURE DROP FOR FLOW BOILING INSIDE MICROFINNED HELICALLY COILED TUBE

机译:微细螺旋管内流动沸腾的流动模式和压降

获取原文
获取原文并翻译 | 示例

摘要

In this paper, flow patterns and their transitions for refrigerant R134a boiling in a micro finned helically coiled tube are experimentally observed and analyzed. All the flow patterns occurred in the test can be divided into three dominant regimes, stratified-wavy flow, intermittent flow and annular flow. Experimental data are plotted in two kinds of flow maps, i.e., Taitel and Dukler flow map and mass flux versus vapor quality flow map. The transitions between various flow regimes and the differences from that in smooth straight tube have also been discussed. Martinelli parameter can be used to indicate the transition from intermittent flow to annular flow. The transition from stratified-wavy flow to annular or intermittent flow is identified in the vapor quality versus mass flux flow map. The flow regime is always in stratified-wavy flow for a mass flux less than 100kg/(m~2s).The two-phase frictional pressure drop characteristics in the test tube are also experimentally studied. The two-phase frictional multiplier data can be well correlated by Lockhart-Martinelli parameter. Considering the corresponding flow regimes, i.e., stratified and annular flow, two frictional pressure drop correlations were proposed, and showed a good agreement with the respective experimental data.
机译:本文通过实验观察和分析了在微翅片螺旋盘管中沸腾的制冷剂R134a的流动模式及其转变。试验中发生的所有流型都可以分为三种主要形式:分层波浪流,间歇流和环形流。实验数据绘制在两种流程图中,即Taitel和Dukler流程图以及质量通量与蒸汽质量的流程图。还讨论了各种流动状态之间的过渡以及与光滑直管之间的过渡。马蒂内利参数可用于指示从间歇流到环形流的过渡。在蒸汽质量与质量通量流图中,可以识别出从分层波浪流到环形流或间歇流的过渡。质量流量小于100kg /(m〜2s)时,流态始终为分层波状流。还对试管中的两相摩擦压降特性进行了实验研究。通过Lockhart-Martinelli参数可以很好地关联两相摩擦系数数据。考虑到相应的流态,即分层流和环形流,提出了两种摩擦压降相关性,并与各自的实验数据显示出良好的一致性。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号