Experimental investigation on convective heat transfer and pressure drop of cone helically coiled tube heat exchanger using carbon nanotubes/water nanofluids

摘要

This study investigates the heat transfer and the pressure drop of cone helically coiled tube heat exchanger using (Multi wall carbon nano tube) MWCNT/water nanofluids. The MWCNT/water nanofluids at 0.1%, 0.3%, and 0.5% particle volume concentrations were prepared with the addition of surfactant by using the two-step method. The tests were conducted under the turbulent flow in the Dean number range of 2200 < De < 4200. The experiments were conducted with experimental Nusselt number is 28%, 52% and 68% higher than water for the nanofluids volume concentration of 0.1%, 0.3% and 0.5% respectively. It is found that the pressure drop of 0.1%, 0.3% and 0.5% nanofluids are found to be 16%, 30% and 42% respectively higher than water. It is studied that the prepared MWCNT/water nanofluids show good stability even after 45 days of preparation and there is no considerable deposit of nanotubes on the tube inner wall. It is also studied that there is no immediate risk of handling MWCNT and studied that there is no significant erosion of coiled tube inner wall surface even after several test runs. Therefore the MWCNT/water nanofluids are the alternate heat transfer fluids for traditional fluids in the cone helically coiled tube heat exchanger to improve the heat transfer with considerable pressure drop.