首页> 外文会议>Functional imaging and modeling of the heart >Mapping Contact Force during Catheter Ablation for the Treatment of Atrial Fibrillation: New Insights into Ablation Therapy
【24h】

Mapping Contact Force during Catheter Ablation for the Treatment of Atrial Fibrillation: New Insights into Ablation Therapy

机译:导管消融治疗心房纤颤过程中的接触力测绘:消融治疗的新见解

获取原文
获取原文并翻译 | 示例

摘要

The distribution of ablation catheter contact force may be important for elucidating the mechanisms of pulmonary vein (PV) reconnection following PV isolation (PVI) for the treatment of paroxysmal atrial fibrillation (PAF). A novel method was developed for the visualisation of tissue contact force on left atrial models derived from segmented MRI data and the approach was tested in 3 patients. The left atrium was automatically segmented from pre-procedural whole-heart cardiac magnetic resonance (CMR) scans in three patients undergoing circumferential PVI for catheter ablation of PAF. During the procedure, the CMR shell was overlaid on to real-time fluoroscopy using the EP Navigator (EPN) software (Philips Healthcare, The Netherlands) and registered using the trachea and intracardiac catheters. Using a wide area circumferential approach to encircle ipsilateral pairs of PVs, the position of each radiofrequency (RF) application (25W for 40s) was recorded on the CMR shell using the point tagging feature of EPN. Using a contact force-sensing ablation catheter (TactiCath, Endosense, Switzerland), the contact force-time integral (FIT) for each registered ablation point was recorded. The FTI for each point was then projected on to the CMR shell with a circular diameter of 10mm using custom-made software. This radius of force distribution was chosen to reflect the typical accuracy of location of the mapping catheter and also to take into account the motion of the catheter during the RF application. 4 vein PVI and FTI maps were achieved in all patients (see figure 1 for example). The mean FTI applied to each side of the left atrium was recorded in gram seconds. The total and regional FTTs applied to achieve PVI differed between and within patients respectively, but in an inconsistent manner. The FTI map on the pre-segmented atrial shell provides an intuitive post-procedural assessment of the tissue-contact force achieved during RF delivery. The FTI is less consistent between patients for the RPVs than for the LPVs, perhaps reflecting patient-specific technical challenges. Comparison of FTI maps with post-ablation delayed enhancement, T2W MRI and clinical outcome data may assist in understanding the mechanisms of effective lesion delivery and of PV reconnection after ablation.
机译:消融导管接触力的分布对于阐明PV隔离(PVI)后用于治疗阵发性房颤(PAF)的肺静脉(PV)重新连接的机制可能很重要。开发了一种新颖的方法,用于可视化来自分段MRI数据的左心房模型上的组织接触力,并在3位患者中对该方法进行了测试。在三名接受环行PVI进行PAF导管消融的患者中,术前全心心脏磁共振(CMR)扫描自动分割了左心房。在此过程中,使用EP Navigator(EPN)软件(荷兰飞利浦医疗公司)将CMR外壳覆盖在实时荧光透视上,并使用气管导管和心内导管进行套准。使用广域圆周方法环绕同侧的PV,使用EPN的点标记功能将每个射频(RF)应用程序的位置(25W,持续40s)记录在CMR外壳上。使用接触力感应消融导管(TactiCath,Endosense,瑞士),记录每个已记录消融点的接触力-时间积分(FIT)。然后使用定制软件将每个点的FTI投影到10mm圆形直径的CMR外壳上。选择该力分布半径以反映标测导管的典型定位精度,并且还考虑到在RF应用期间导管的运动。在所有患者中均获得了4个静脉PVI和FTI图(例如,见图1)。记录在左心房两侧的平均FTI以克秒为单位记录。在患者之间和患者内部,用于实现PVI的总FTT和区域FTT均不同,但方式不一致。预先分割的心房外壳上的FTI图可对RF输送过程中获得的组织接触力进行直观的手术后评估。对于RPV,患者之间的FTI不一致,而不是LPV,这可能反映了患者特定的技术挑战。将FTI图与消融后延迟增强,T2W MRI和临床结果数据进行比较可有助于了解消融后有效病变转移和PV重新连接的机制。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号