【24h】

Mechanical properties of magnetostrictive iron-gallium alloys

机译:磁致伸缩铁镓合金的机械性能

获取原文
获取原文并翻译 | 示例

摘要

Single crystal specimens of Fe-17 at. % Ga were tested in tension at room temperature. Specimens with a tensile axis orientation of [100] displayed slip lines on the specimen faces corresponding to slip on the {110}<111> with a critical resolved shear stress τ_(CRSS) = 220 MPa. Yielding began at 0.3% elongation and 450 MPa. An ultimate tensile strength of 580 MPa was observed with no fracture occurring through 1.6% elongation. The Young's modulus was 160 GPa in the loading direction with a Poisson's ratio of -0.37 on the (100) major face. A specimen with a tensile axis orientation of [100] showed slip lines corresponding to slip on the {211}<111> with τ_(CRSS) = 240 MPa. Discontinuous yielding began at 0.8% elongation, which was thought to result from twinning, kink band formation, or stress-induced transformation. The Young's modulus was 65 GPa in the loading direction with a Poisson's ratio of 0.45 on the (001) major face. A maximum tensile strength of 515 MPa was observed with fracture occurring after 2% elongation. A sizeable elastic anisotropy of 19.9 was identified for Fe-27.2 at. % Ga accompanied by a Poisson's ratio of -0.75 to produce a large in-plane auxetic behavior.
机译:Fe-17 at的单晶标本。在室温下测试%Ga的张力。拉伸轴方向为[100]的标本在标本面上显示的滑移线对应于{110} <111>上的滑移,且临界解析剪切应力τ_(CRSS)= 220 MPa。屈服始于0.3%的延伸率和450 MPa。观察到极限拉伸强度为580 MPa,延伸率1.6%时无断裂。 (100)主面上的杨氏模量在加载方向上为160 GPa,泊松比为-0.37。拉伸轴方向为[100]的样品的滑移线对应于{211} <111>上的滑移,τ_(CRSS)= 240 MPa。不连续屈服始于0.8%的伸长率,这被认为是由孪晶,扭结带形成或应力诱导的转变引起的。 (001)主面上的杨氏模量在加载方向上为65 GPa,泊松比为0.45。观察到最大抗拉强度为515 MPa,在2%伸长率后发生断裂。对于Fe-27.2at,确定了19.9的相当大的弹性各向异性。 %Ga伴随着-0.75的泊松比,以产生较大的平面内拉力行为。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号