首页> 外文会议>Advances in slow and fast light VI >Dispersion enhancement in atom-cavity and coupled cavity systems
【24h】

Dispersion enhancement in atom-cavity and coupled cavity systems

机译:原子腔和耦合腔系统中的色散增强

获取原文
获取原文并翻译 | 示例

摘要

We present an entirely linear all-optical method of dispersion enhancement using coupled cavities that leads to a substantial increase in system transmission in comparison with atom-cavity systems. This is achieved by tuning the system to an anomalous dispersion condition by under-coupling at least one of the cavities to the other. The intracavity anomalous dispersion is then associated with a dip in reflection (and in turn with a peak in transmission) rather than with an absorption resonance as in the case of the atomic vapor. We find that in contrast with the atom-cavity system where mode reshaping always contributes to the mode pushing, in coupled cavity systems reshaping of the mode profile can either contribute to or oppose the mode pushing, and even reverse it under appropriate conditions leading to a reduced scale factor in transmission. We demonstrate a method for further optimizing the transmission of both atom-cavity and coupled-cavity systems, but show that this leads to a more rectangular mode profile and a reduction in the scale factor bandwidth. We also derive the cavity scale factor in reflection for both atom-cavity and coupled cavity systems and show that in reflection the reshaping of the mode profile can either contribute to or oppose the mode pushing, but cannot reverse it.
机译:我们提出了一种使用耦合腔的色散增强的全线性全光学方法,与原子腔系统相比,该方法导致系统传输量大大增加。这是通过将至少一个型腔与另一个型腔耦合不足而将系统调整到异常分散状态来实现的。然后,腔内异常分散与反射的下降(进而与透射的峰值)有关,而不是与原子蒸气情况下的吸收共振有关。我们发现,与原子腔系统相反,其中模式重塑总是有助于模式推进,而在耦合腔系统中,模式轮廓的重塑既可以促进或反对模式推进,甚至在适当的条件下将其反转,从而导致模态推进。减少了传输中的比例因子。我们展示了一种进一步优化原子腔和耦合腔系统传输的方法,但表明这导致了更多的矩形模式轮廓和比例因子带宽的减小。我们还导出了原子腔和耦合腔系统在反射中的腔比例因子,并表明在反射中,模式轮廓的重塑可以有助于或反对模式推动,但不能使其反转。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号