Effects of Thicknesses of Sheet and Adhesive Layer on Plastic-bending of Adhesively Bonded Sheet Metals

摘要

In this paper, the effects of the thicknesses of sheet and adhesive layer on plastic forming of adhesively bonded sheet metals were investigated by experiments and the corresponding numerical simulation. The main conclusions obtained are as follows: (1) When the thickness of the adherends increases, the gull-wing bend of the bent sheet and the transverse shear deformation in the adhesive layer become larger, which in some cases the delamination occurs in the adhesive layer. (2) The gull-wing bend of the bent sheet becomes larger with increasing adhesive layer thickness, but conversely the shear strain in the adhesive layer becomes smaller.