Re-engineering Production Processes Using Electron Beam Curing

机译：使用电子束固化技术重新设计生产流程

获取原文

获取原文并翻译 | 示例

页面导航

摘要
著录项
相似文献
相关主题

摘要

1. EB curing offers exciting new possibilities 1.1 Re-engineered packages and processes 2. New adhesives and coating technology 2.1 Comparable performance to existing technologies 2.2 Continual refinement to meet challenges.

机译：1. EB固化提供了令人兴奋的新可能性1.1重新设计的包装和工艺2.新的粘合剂和涂料技术2.1与现有技术相当的性能2.2不断完善以应对挑战。

著录项

来源
《Adhesive and Sealant Council,Inc. Spring Convention and Exposition; 20030413-16; St.Louis,MO(US)》|2003年|P.16.1-16.16|共16页
会议地点 St.LouisMO(US)
作者
Torn Kauffman;
展开▼
作者单位

Rohm and Haas Company, USA;

展开▼
会议组织
原文格式 PDF
正文语种 eng
中图分类胶粘剂工业;
关键词

相似文献

外文文献
中文文献
专利

1. Modification Processes in Surface Layers of Metallic Materials Using Pulsed-Particles' Beams, 1. Mass-Transfer and Mixing Processes as a Result of High-Current Electron Beam Treatment [J] . Pogrebnyak A.D., Bojko V.I. Metal Physics and Advanced Technologies . 1999,第9期

机译：使用脉冲粒子束对金属材料表面层进行的改性工艺，1.大电流电子束处理导致的传质和混合工艺
2. Effects of the electron-beam absorption dose on the glass transition, thermal expansion, dynamic mechanical properties, and water uptake of polycardanol containing epoxy groups cured by an electron beam [J] . Cheon Jinsil, Cho Donghwan Journal of Applied Polymer Science . 2015,第39a40期

机译：电子束吸收剂量对电子束固化的含环氧基聚腰果酚的玻璃化转变，热膨胀，动态力学性能和吸水率的影响
3. Optimization of postgrowth electron-beam curing for focused electron-beam-induced Pt deposits [J] . Harald Plank, Gerald Kothleitner, Ferdinand Hofer, Journal of Vacuum Science & Technology . 2011,第5期

机译：聚焦电子束诱导的Pt沉积物的生长后电子束固化的优化
4. Re-engineering Production Processes Using Electron Beam Curing [C] . Torn Kauffman Adhesive and Sealant Council,Inc. Convention and Exposition . 2003

机译：使用电子束固化重新设计生产过程
5. A measurement of hadron production cross-sections for the simulation of accelerator neutrino beams and a search for muon neutrino to electron neutrino oscillations in the difference of the squared mass in approximately the 1 squared electron volt region [D] . Schmitz, David W. 2008

机译：测量强子产生横截面，以模拟加速器中微子束，并在大约1平方电子伏特区域的平方质量差中搜索μ中子到电子中微子的振荡
6. Additive Manufacturing Processes: Selective Laser Melting Electron Beam Melting and Binder Jetting—Selection Guidelines [O] . Prashanth Konda Gokuldoss, Sri Kolla, Jürgen Eckert 2017

机译：增材制造过程：选择性激光熔化电子束熔化和粘合剂喷射—选择准则
7. Comparison of the fracture toughness and wear resistance of indirect composites cured by conventional post curing methods and electron beam irradiation [O] . Vaishnavi, C, Kavitha, S, Narayanan, L Lakshmi 2010

机译：常规后固化和电子束辐照固化间接复合材料的断裂韧性和耐磨性比较
8. Critical parameters for electron beam curing of cationic epoxies and property comparison of electron beam cured cationic epoxies versus thermal cured resins and composites [R] . Janke, C. J. , Norris, R. E. , Yarborough, K. , 1997

机译：阳离子环氧树脂电子束固化的关键参数和电子束固化阳离子环氧树脂与热固化树脂和复合材料的性能比较

Re-engineering Production Processes Using Electron Beam Curing

摘要

著录项

相似文献

相关主题

期刊订阅