NUMERICAL INVESTIGATION ON FLOW PATTERN AND PRESSURE DROP CHARACTERISTICS OF SLUG FLOW IN A MICRO TUBE

摘要

In the present study, numerical simulation of adiabatic air-water slug flow in a micro tube is carried out. The focus is laid upon the pressure drop characteristics and its modeling. The Phase-Field method is employed to capture the interface between the phases, while the surface tension force is represented by the chemical potential formulation. The numerical results agree fairly well with available experimental results in terms of bubble shape and flow pattern.rnSimulation is repeated under different conditions of pressure gradient, void fraction and bubble frequency. It is found that the total pressure drop of a slug flow can be decomposed into two parts, i.e., the frictional pressure drop associated with a liquid slug sandwiched by bubbles, and the pressure drop over a bubble itself. For the former, when the liquid slug is longer than one tube diameter, the cross-sectional velocity distribution resembles a Poiseuille flow profile, so that the corresponding pressure drop can be predicted by the theoretical solution of single-phase liquid flow, i.e., fRe_(TP)= 64. For the latter, if it is assumed that the surface tension force is strong enough to sustain a thin liquid film between the interface and the tube wall, the pressure drop in this region is negligible. The pressure drop over a bubble is solely dependent on the two-phase superficial Reynolds number Re_(TP), which can be correlated as: Δp'_(bubb) = 0.07 + 42.4 / Re_(TP). This correlation predicts well the two-phase pressure drop in the form of the two-phase multiplier correlation as a function of the Lockhart-Martinelli parameter.