首页> 外文会议>55th International Astronautical Congress 2004 vol.11 >A NEW PULSE FACILITY FOR STUDIES ON ROCKET BASED COMBINED CYCLES
【24h】

A NEW PULSE FACILITY FOR STUDIES ON ROCKET BASED COMBINED CYCLES

机译:一种新型的基于火箭的复合循环研究脉冲装置

获取原文
获取原文并翻译 | 示例

摘要

The new high-enthalpy pulse facility developed at CNR-IENI-Milano for basic studies on combined cycles propulsion systems is described. The facility is based on a 100 liters volume free-piston compressor. The test chamber, embodied into a large dump tank, is wide enough to contain small scale models of motors and all necessary diagnostic systems. Mach number profiles, pressure and temperature of the test section air flow have been obtained in the Mach number range 3-7. The test gas is clean air for Mach numbers lower than 4.5 and vitiated air for higher speeds, as hydrogen pre-combustion is used to enhance the flow enthalpy. Dynamic pressure data fall in the flight corridor generally accepted for air-breathing propulsion. The results of a preliminary experimental investigation on a miniaturized hydrogen/oxygen rocket motor are given. On this ground, a small size rocket-based air-breathing prototype was designed, built and instrumented with pressure and temperature probes. A number of preliminary tests at simulated flight Mach numbers in the range 3.5 - 6.5 successfully demonstrated the actual capabilities of the experimental facility, the correct synchronization of air flow and rocket motor operation, and the global performance of the data acquisition system.
机译:描述了由CNR-IENI-Milano开发的新型高焓脉冲设施,用于联合循环推进系统的基础研究。该设施基于一台100升容积的自由活塞式压缩机。装在大型垃圾箱中的测试室足够宽,可以容纳小型电动机模型和所有必要的诊断系统。马赫数分布图,测试段气流的压力和温度已在马赫数范围3-7中获得。测试气体是马赫数低于4.5的清洁空气,而速度更快的是经过风吹扫的空气,因为氢气的预燃烧用于增强流动焓。动态压力数据落在通常被认为是空气呼吸推进的飞行走廊中。给出了对小型化氢气/氧气火箭发动机的初步实验研究的结果。在此基础上,设计,建造了小型的基于火箭的空气呼吸原型,并配备了压力和温度探头。在模拟飞行马赫数在3.5-6.5范围内的许多初步测试成功地证明了实验设施的实际功能,气流和火箭发动机操作的正确同步以及数据采集系统的整体性能。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号