首页> 外文会议>2015 IEEE Magnetics Conference >Effects of metalloids in Fe-rich soft magnetic amorphous alloys on magnetization
【24h】

Effects of metalloids in Fe-rich soft magnetic amorphous alloys on magnetization

机译:富铁软磁非晶合金中准金属对磁化的影响

获取原文
获取原文并翻译 | 示例

摘要

A large amount of research efforts have been focused on the development of Fe-based amorphous alloys, a kind of soft magnetic materials that is promising in the potential application of motors, transformers and choke coils due to their excellent soft magnetic property. The extraordinarily low coercivity is caused by the disordered structure and the lack of micro-scale anisotropy. Generally, the inclusion of the minor alloying elements necessary for the formation of the amorphous structure can interfere with the Fe-Fe ferromagnetic exchange and reduce the maximum magnetization [1], which is a disadvantage for the efficiency and minimization of the produced devices. On the other hand, it is reported that some common alloying metalloids, such as B and P, can promote the Fe atoms in amorphous alloys into high spin state with larger magnetic moment [2]. The present study is to clarify and optimize the magnetic effect of the alloying elements in Fe-rich amorphous alloys. In this research work, ab initio molecular dynamics simulations were performed for FeSiBP-Cu, FeSiBP and FeSiBNbCu amorphous alloys. Considering the electric charge transfer, electron structure as well as the cluster formation, it is clarified that minor inclusion of B and P can effectively absorb electrons from Fe atoms, making the radii of 3d orbitals of Fe decrease towards optimum ferromagnetic exchange between Fe-Fe atoms. However, with increasing B/P content, the replacement of Fe-Fe bonds by Fe-metalloids bonds makes severe magnetically inert p-d hybridization which reduces the spin polarization of 3d electrons as well as the magnetic moments [3]. Therefore, B and P have complicated magnetic effect in Fe-based amorphous alloys, which appears to promote magnetization with low concentration, but reduces it at larger concentrat- on. Besides, it was found that Si shows no beneficial effect on increasing the magnetization of the amorphous alloys due to the hybridization between Si 3p and Fe 3d orbitals, although experimental data indicate that Si is good for amorphous formation or crystallization controllability [4].
机译:Fe基非晶合金是一种软磁材料,由于其优异的软磁性能,在电机,变压器和扼流圈的潜在应用中很有希望,因此大量的研究工作都集中在其上。矫顽力极低是由于无序结构和缺乏微观各向异性引起的。通常,形成非晶态结构所必需的微量合金元素的加入会干扰Fe-Fe铁磁交换并降低最大磁化强度[1],这对于所生产器件的效率和最小化是不利的。另一方面,据报道,一些常见的合金准金属,例如B和P,可以在更大的磁矩的作用下促进非晶态合金中的Fe原子进入高自旋态[2]。本研究旨在阐明和优化富铁非晶合金中合金元素的磁效应。在这项研究工作中,对FeSiBP-Cu,FeSiBP和FeSiBNbCu非晶合金进行了从头算的分子动力学模拟。考虑到电荷转移,电子结构以及团簇形成,可以清楚地表明,少量掺入B和P可以有效吸收Fe原子中的电子,从而使Fe的3d轨道半径朝着Fe-Fe之间的最佳铁磁交换方向减小原子。但是,随着B / P含量的增加,Fe-类金属键取代Fe-Fe键会导致严重的磁惰性p-d杂化,从而降低3d电子的自旋极化以及磁矩[3]。因此,B和P在铁基非晶态合金中具有复杂的磁效应,这似乎在低浓度时促进磁化,但在较大浓度时会降低磁化强度。此外,尽管实验数据表明,硅对于非晶形成或结晶可控性是有益的,但发现由于Si 3p和Fe 3d轨道之间的杂化,Si对增加非晶态合金的磁化强度没有有益的作用[4]。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号