首页> 外文会议>2013 IEEE Energy Conversion Congress amp; Exposition >Development of a 500-kW Modular Multilevel Cascade Convertor for battery energy storage systems
【24h】

Development of a 500-kW Modular Multilevel Cascade Convertor for battery energy storage systems

机译:开发用于电池储能系统的500 kW模块化多级串级转换器

获取原文
获取原文并翻译 | 示例

摘要

Natural energy sources such as wind turbines and photovoltaic power generators cause instability of the power grid due to their output fluctuations. Battery energy storage systems (BESSs) are being considered as a countermeasure for this issue. A Modular Multilevel Cascade Convertor (MMCC) is one suitable circuit topology for BESSs, because each cell can control each battery's state-of-charge independently, and the level of generated harmonics is low enough to eliminate the AC filter normally installed in conventional two level converters. This paper describes the development of a real-scale (500 kW) H-bridge MMCC for BESSs and reports successful test results of the control functions with a scale down grid model and a 6.6-kV real-scale distribution line.
机译:诸如风力涡轮机和光伏发电机之类的自然能源由于其输出波动而导致电网不稳定。电池能量存储系统(BESS)被视为解决此问题的对策。模块化多级串级转换器(MMCC)是一种适用于BESS的电路拓扑,因为每个电池单元都可以独立控制每个电池的充电状态,并且产生的谐波电平足够低,因此可以消除通常安装在传统两级中的交流滤波器转换器。本文描述了用于BESS的实际规模(500 kW)H桥MMCC的开发,并报告了按比例缩小的网格模型和6.6 kV实际规模配电线路的控制功能的成功测试结果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号