A SUCCESSFULLY SERVICE TESTED HARD IRON WITH SUPERIOR ABRASION AND CORROSION RESISTANCE IS AVAILABLE FOR THE MINERAL PROCESSING INDUSTRY

摘要

One way of cost reduction is attained when using materials with improved erosion - corrosion resistance. For many years hard irons successfully answered the Mining Operation needs however application ranges were limited due to the low chemical resistance of such alloys. Corrosion resistance of any hard iron increases when microscopically homogenizing chromium and generating passivation conditions throughout and between all metallographic phases. Chromium distribution of the new material called Max10 was analyzed with EDS - energy dispersive spectroscopy. At critical depleted chromium carbide - matrix interfaces chromium increased to 31.72% which is well within passivation levels. Generally the corrosion resistance of high chromium hard irons provided by Metal Casting Industry is limited to 0.5% sulfuric acid and 28 PPM ionic chlorides. Such restrains increased when using Max10 to 2.0% sulfuric acid and 100 PPM ionic chlorides. Max10 contains 35% carbide volume fraction, has excellent corrosion resistance within pH = 1.15 - 13.6 while fracture toughness under plain - strain conditions and Mode I opening is K_(IG) = 20 KSI.(inch). Wear rate was calculated with the pin-on-disk apparatus using a diamond indenter per ASTM G99 recommendation. After years of research, experimentation and implementation the Max10 castings were service installed in slurry pumps and mixing equipment. In some applications the life time of slurry pumps manufactured in Max10 tripled versus previously used materials.