ADDITIONAL STUDIES ON DISTORTION OF 316L AND 17-4PH MIM PARTS MADE FROM 1.5X MASTER ALLOY/ CARBONYL IRON BLENDED POWDER

机译：1.5倍主合金/羰基铁混炼粉制成的316L和17-4PH MIM零件变形的附加研究

获取原文

获取原文并翻译 | 示例

页面导航

摘要
著录项
相似文献
相关主题

摘要

Distortion in MIM parts made of 316L and 17-4PH materials was evaluated based on the effect of powder particle size and alloying technique. The distortion in parts produced from pre-alloyed powder was progressive with the increase of temperature. The 1.5X master alloy/carbonyl iron powder blend exhibited initial distortion followed by a transitory recovery prior to becoming progressive again with the final increase in temperature. This study focuses on this phenomenon.

机译：根据粉末粒度和合金化技术的影响，对由316L和17-4PH材料制成的MIM零件中的变形进行了评估。由预合金粉末制成的零件中的变形随温度的升高而逐渐发展。 1.5X中间合金/羰基铁粉混合物表现出最初的变形，随后出现短暂的恢复，然后随着温度的最终升高再次进行。这项研究集中于这种现象。

著录项

来源
《2002 World Congress on Powder Metallurgy amp; Particulate Materials Pt.10 Jun 16-21, 2002 Orlando, FI》|2002年|p.199-209|共11页
会议地点 Orlando FL(US)
作者
D.T. Whychell; Sr.; T.A. Tingskog;
展开▼
作者单位

CM Furnaces, Inc. 103 Dewey Street Bloomfield, NJ 07003;

展开▼
会议组织
原文格式 PDF
正文语种 eng
中图分类冶金工业;
关键词
入库时间 2022-08-26 14:13:16

相似文献

外文文献
中文文献
专利

1. BASF continues to evolve carbonyl iron powders: growth in markets such as MIM is providing the impetus for BASF to develop its long-standing range of carbonyl iron powders [J] . A. W. Friederang Metal Powder Report . 1999,第3期

机译：巴斯夫不断发展羰基铁粉：MIM等市场的增长为巴斯夫发展其长期的羰基铁粉提供了动力
2. An evaluation of coarser iron powders as a substitute for carbonyl iron in low alloyed MIM materials [J] . Mike Stuckey, Jens Rassmus Powder Injection Moulding International . 2012,第3期

机译：低合金MIM材料中粗铁粉替代羰基铁的评估
3. Interface formation and diffusion of alloying elements during cosinteririg-of MIM 316L/17-4PH stainless steel parts: experiments and simulation [J] . G. Benedet Dutra, M. Mulser, F. Petzoldt Powder Metallurgy . 2011,第5期

机译：MIM 316L / 17-4PH不锈钢零件的共烧结过程中合金元素的界面形成和扩散：实验和模拟
4. ADDITIONAL STUDIES ON DISTORTION OF 316L AND 17-4PH MIM PARTS MADE FROM 1.5X MASTER ALLOY/ CARBONYL IRON BLENDED POWDER [C] . D.T. Whychell Sr., T.A. Tingskog World congress on powder metallurgy particulate materials . 2002

机译：关于316L和17-4PH MIM部件的额外研究由1.5X主合金/羰基铁混合粉末制成
5. FUNDAMENTAL STUDY OF ALUMINIZING OF IRON BY USING PACK CEMENTATION TECHNIQUE (COATING, MASTER ALLOY, SUBSTRATE) [D] . KUNG, SI-CHENG 1986

机译：利用包固结技术（涂层，母合金，基料）对铁的铝化进行基础研究
6. Rapid Alloy Development of Extremely High-Alloyed Metals Using Powder Blends in Laser Powder Bed Fusion [O] . Simon Ewald, Fabian Kies, Steffen Hermsen, 2019

机译：在激光粉末床熔合中使用粉末混合物快速开发超高合金金属的合金
7. FeSiCr Alloy Powder to Carbonyl Iron Powder Mixing Ratio Effects on the Magnetic Properties of the Iron-Based Alloy Powder Cores Prepared Using Screen Printing [O] . Hsing-I. Hsiang, Kai-H. Chuang, Wen-H. Lee 2021

机译：Fesicr合金粉末到羰基铁粉末混合比对使用丝网印刷制备的铁基合金粉芯的磁性。

ADDITIONAL STUDIES ON DISTORTION OF 316L AND 17-4PH MIM PARTS MADE FROM 1.5X MASTER ALLOY/ CARBONYL IRON BLENDED POWDER

摘要

著录项

相似文献

相关主题

期刊订阅