首页>
外国专利>
METHOD OF STARTING CASTING MACHINE HAVING CATERPILLAR-TYPE MOLDS FOR CASTING NONFERROUS METAL STRIPS AND MACHINE FOR CARRYING OUT THIS METHOD
METHOD OF STARTING CASTING MACHINE HAVING CATERPILLAR-TYPE MOLDS FOR CASTING NONFERROUS METAL STRIPS AND MACHINE FOR CARRYING OUT THIS METHOD
展开▼
机译:具有卡特彼勒型铸型有色金属带的铸机的启动方法及实施该方法的机器
展开▼
页面导航
摘要
著录项
相似文献
摘要
1322319 Tundishes PROLIZENZ AG 19 April 1971 [15 April 1970] 26973/71 Heading F4B [Also in Division B3] For continuously casting strip (e.g. of Al or Al alloy 20 mm. thick and at least 1500 mm. wide), a machine has two endless, driven sets of articulated mould blocks 10 which sets cooperate to define between them a moving mould cavity, a tundish 12 with an outlet nozzle (20), a cooling system 24 (e.g. as described in Specification 1,186,466) and withdrawal means 25, all mounted on a tiltable frame 26 so that casting can be started with the mould cavity between 0 and 5 degrees to the horizontal, then when the leading end of the strip is formed, the machine can be set in motion and the casting continued with the cavity at a greater inclination, i.e. 4 degrees or more to the horizontal. The frame 26 is tilted by an hydraulic jack 29 which adjusts the height of a horizontal bearer 28. The angle of tilt may be as high as 45 degrees. A flexible channel 14 supplies the tundish 12 to maintain the melt level.
展开▼
机译:1322319 Tundishes PROLIZENZ AG 1971年4月19日[1970年4月15日]税目F4B [也在B3分区中]对于连续铸造的带钢(例如厚度20毫米且宽度至少1500毫米的Al或铝合金)两套铰接的无头驱动的动模组10,这组动模组在它们之间共同定义了一个移动的模腔,一个带有出口喷嘴(20)的中间包12,一个冷却系统24(例如,如规格1,186,466中所述)和抽出装置25,全部都安装在可倾斜的框架26上,以便可以在与水平方向成0到5度之间的型腔开始铸造,然后在形成带钢的前端时,使机器运动,然后继续铸造。腔以更大的倾斜度,即相对于水平线成4度或更大。框架26由液压千斤顶29倾斜,该液压千斤顶29调节水平支架28的高度。倾斜角度可以高达45度。柔性通道14供应中间包12以维持熔融水平。
展开▼