首页>
外国专利>
Continous cycle compactor tunnel with a circulating forced air forechambre for getting off solid urban waste materials biodegradable and for selecting those no biodegradable but recycling
Continous cycle compactor tunnel with a circulating forced air forechambre for getting off solid urban waste materials biodegradable and for selecting those no biodegradable but recycling
The tunnel is made by a caged steel sheet; whose dimention is: m.100 x 6 x 6, with a bee nest frame and IPE beams (see fig.1 and 2). It is closed by a moving door at one side (see fig.4) having a counterbalance. As soon as the door opens, there will be installed two mushers (see fig.6) at the loopholes base of the tunnel side (see fig.7) in a below recipient (see fig.22), so doing the reaping of the percolate drain is to be poured inside of an outside pool (see fig.3).The moving opposit wall has a particular form (see fig.9) and it runs on a two rails, in the middle of the above mentioned wall whereas a hydraulic cylinder is anchored (see fig.12) outside, permitting the moving wall to forward (see fig.9). Next to the front face, at the tunnel base, there is the circulating forced air forechambre (see fig.13) in a semicylinder form,made with inox steel sheet, having inside of it some support bars in a circular semicrown form. They are intervalled with some ventilators (see fig.17). On the upper tunnel face, parallely to the forechambre, there are two inox perfored pipes distant from each other,whereas the lying percolate will periodically be put inside of the esternal pool. On the upper face there are two enterning mouths (see fig.15) for the coming in of the air and yet, for the waste materials (see fig.20). On the same wall, there are the discharge pipes (see fig.18) having at the base some filters capable to eliminate bad shent (see fig.19). The tunnel itself can be lifted up m. 2 from the sloping soil and m. 1 from the final side.
展开▼
机译:隧道由笼状钢板制成;其尺寸为:m.100 x 6 x 6,带有蜂巢框架和IPE光束(见图1和2)。它由一侧带有平衡重的移动门(参见图4)关闭。门一打开,便在下方的接收器(见图22)的隧道侧(见图7)的漏洞底部安装了两个捣碎器(见图6),以便进行收割。渗滤水要倒入室外水池的内部(见图3)。活动的对置壁具有特殊的形状(见图9),它在上述壁的中间在两条轨道上运行,而液压缸固定在外部(参见图12),从而使移动壁向前移动(参见图9)。在正面附近,在隧道底部,有一个半圆柱体形式的循环强制空气前腔(见图13),该圆柱体由inox钢板制成,在其内部具有一些圆形半冠状的支撑杆。它们之间间隔有一些通风机(见图17)。在平行于前庭的上部隧道面上,有两条彼此隔开的inox穿孔管,而定期放置的渗滤液将被置于永恒的水池内部。在上表面有两个进入口(见图15),用于进入空气,而用于废物(见图20)。在同一壁上,排水管(见图18)的底部有一些过滤器,能够消除不良的sh音(见图19)。隧道本身可以抬高m。从坡土和米2。从最后一侧开始1。
展开▼