首页>
外国专利>
Elastomer tests on vulcameter appts. - by injecting elastomer into heated closed mould and measuring its resistance to flow torsional load
Elastomer tests on vulcameter appts. - by injecting elastomer into heated closed mould and measuring its resistance to flow torsional load
展开▼
机译:在阴模仪上进行弹性体测试。 -通过将弹性体注入加热的封闭模具中并测量其对流动扭转载荷的抵抗力
展开▼
页面导航
摘要
著录项
相似文献
摘要
"Vulcameter" (cure test appts. for elastomers) tests are made with a closed (or closable) mould cavity for a test moulding by injecting the material and subjecting it to high temp. and shear or torsional stress, then measuring deformation resistance against time. More specifically, a conventionally mounted mould has a cavity (1) to produce the test piece (2) of elastomer between the top (3) and lower (4) tools. The shot is injected through the gate (6) of a cylinder (7) fitted with a plunger. If the two tools (3,4) do not seal off the sides of the cavity an outer ring (9) can surround its split line (8). It is useful to enclose the mould system in a sealed chamber containing slightly pressurised and cleaned air. This chamber has a top (10) and bottom (11) cover and is arranged to open when the mould opens. The split line (12) between its top (10) and bottom (11) halves is at the same level as that (8) of the cavity (1). ADVANTAGE - The method does not require test pieces to be produced beforehand. It provides accurate tests and is simple to perform.
展开▼