首页>
外国专利>
OZONE AMOUNT MEASURING SYSTEM OF CALIBRATION/COMPARISON BALANCE SYSTEM
OZONE AMOUNT MEASURING SYSTEM OF CALIBRATION/COMPARISON BALANCE SYSTEM
展开▼
机译:校准/比较平衡系统的臭氧量测量系统
展开▼
页面导航
摘要
著录项
相似文献
摘要
PURPOSE: To accurately obtain ozone amount by connecting a series connection of an electrode and an impedance and a series connection of two more sets of impedances in parallel with a power source, and measuring potential differences among the electrode, the impedances and connecting points between the impedances. ;CONSTITUTION: A voltage V is supplied from power source terminals (d), (e) to an electrode 11 through a resistor 12, and simultaneously supplied to resistors 13, 14 connected in series. Let the resistance values of the resistors 12-14 be R12-R14, voltages to be applied to the resistors 12, 14 be ΔVi, ΔVN, and a state before ozone is introduced be denoted by a suffix B. If a polarization current at the time of introducing the ozone is δi, potential differences ΔV between connecting points of the resistors 11, 12 and the resistors 13, 14 becomes δV= R12δi+ΔViB-ΔVN. When an applied voltage for satisfying balance condition ΔViB=ΔVN is ΔVB and ΔViB=ΔVN=δVB δi=(δV-δVB)/R12 is obtained, and a polarization current can be calculated. Thus, a decomposing current is almost automatically removed from a measured current, and the applied voltage can be suitably set. Accordingly, the ozone amount can be accurately measured.;COPYRIGHT: (C)1994,JPO&Japio
展开▼
机译:目的:通过与电源并联连接电极和阻抗的串联连接以及两组以上阻抗的串联连接,并测量电极之间的电位差,电极之间的阻抗和连接点,以准确地获得臭氧量阻抗。组成:电压V从电源端子(d),(e)通过电阻器12提供给电极11,并同时提供给串联的电阻器13、14。假设电阻器12-14的电阻值为R 12 Sub> -R 14 Sub>,要施加到电阻器12、14的电压为ΔV i Sub >,ΔVN和引入臭氧之前的状态用后缀B表示。如果引入臭氧时的极化电流为δ i Sub>,则电阻器11的连接点之间的电势差ΔV ,12和电阻13、14变为δV= R 12 Sub>δ i Sub> +ΔV i Sub>B-ΔVN。当满足平衡条件的施加电压ΔV i Sub> B =ΔVN为ΔVB且ΔV i Sub> B =ΔVN=δVBδ i Sub> =(δV-获得δVB)/ R 12 Sub>,并可以计算极化电流。因此,分解电流几乎自动从测量电流中去除,并且可以适当地设置施加的电压。因此,可以准确地测量臭氧量。;版权所有:(C)1994,日本特许厅&日本apio
展开▼