首页> 外国专利> The error detection device and method of the signal part which between mutual is put the receiver and the decoding method of adopting the said error detection

The error detection device and method of the signal part which between mutual is put the receiver and the decoding method of adopting the said error detection

机译:相互之间成为接收机的信号部分的错误检测装置和方法以及采用上述错误检测的解码方法

摘要

(57) Abstract The error detector and method of detection and that error detection which do the error detection of the mutual between signal part which includes the n continual data byte which consists of with the information data byte group and at least the error detection data byte of 1 bytes adoption it is decoding method. The error detector operates, in order to form the syndrome which shows whether or not error was detected with the mutual between signal part. The syndrome which occurs formed is the same syndrome as the former error detector which does the error detection of the mutual dissociation signal part which corresponds with dissociation of the mutual between signal part. As for the error method of detection which this error detector uses: Being maximum (a) (as the quantity of between the data bytes which use m for the formation of the mutual between signal part) pulling out m flow of the continual data byte from the n data byte which it receives at the data byte of continual m group, as it includes the data byte where each data bytes style differ in the respective n data byte, the data bytes style of j turn eye in m flow that to try include the byte of j turn eye from each group j as the integer which becomes 0jm, (b) from m data bytes style m part syndrome to form, (c) the m partOn the basis of syndrome, as for the receiver and the decoding method of adopting this error method of detection which forms the last syndrome which shows whether or not error was detected to the mutual between signal part, as advantage of the error detector is enjoyed, (a) error detection (b) it becomes possible to do simultaneously with the mutual dissociation of the mutual between signal part.
机译:(57)<摘要>对包括n个连续数据字节和至少由错误数据组成的n个连续数据字节的信号部分之间的相互进行错误检测的错误检测器及其检测方法和错误检测1字节采用的数据字节是解码方法。误差检测器工作,以形成表示通过信号部分之间的相互关系是否检测到误差的校验子。所形成的校正子与先前的误差检测器相同,该误差检测器对与信号部分之间的相互离解相对应的相互离解信号部分进行检错。至于该错误检测器所使用的错误检测方法:最大值(a)(作为使用m来形成信号部分之间的相互关系的数据字节之间的数量)从中抽出m个连续数据字节流它在连续m组的数据字节处接收到的n数据字节,因为它包括其中每个数据字节样式在各自的n数据字节中不同的数据字节,因此尝试在m流中将j的数据字节样式包括在内从每组j到第j的字节作为整数变为0jm,(b)从m个数据字节样式m部分校正子形成,(c)m部分在校正子的基础上,针对接收器和解码方法采用这种形成最后的征兆的错误检测方法的方法,该错误显示表明是否对信号部分之间的相互检测到错误,由于具有错误检测器的优点,(a)错误检测(b)可以同时进行与mutu的相互分离在信号部分之间。

著录项

相似文献

  • 专利
  • 外文文献
  • 中文文献
获取专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号