In this study, the clamps will be coated on the steel wire ropes of crane, crane, used car and various ships for the purpose of wear and damage, in order to prevent corrosion. At this time, the clamps will be coated for convenience and convenience About Grice's robe,There are side plates on both sides. One side of the side plate is equipped with a motor, and the rotating shaft is made of steel wire rope. On the commercial steel wire rope drum, the side plate of the steel wire rope drum is provided with a body making device with a cover shaft and two side clamping locks Tightly insert the strip lock on the board, clamp and install it with bolts,The guiding party uses the body guide port formed on the body of Grice robe to install the body of Grice robe system. The structure of the ring coating system is the upper part and the lower part forms their own wire rope through holes. In the through holes of the wire rope, the wire rope is used to guide the filling of the wire rope Inserted,One side of the above-mentioned Grice robe,The lower end forms the structure entrance of the body, the other side is provided with a hinge, so that the two parts of the body are turned on and off, one side of the center is a greace level through joint hole, the other side forms a body guide hole, and the inside of the greace level joint hole is a spring and a clamp The built-in laminated paper cylinder at the bottom is combined with screws.
展开▼