The manner which produces business form and its business form which the label which the constituent which makes the image formation by the toner possible coat is done have been unified

摘要

(57) Abstract In order the business form which has the label which had become the sheet and one body, for the sheet to surround the piece of the transfer tape completely (not to be piggy back mode), the piece of the transfer tape, in order for the adhesive of the transfer tape to contact with the sheet, is produced by pasting in only one part of the 2nd aspect of the sheet. The label is something which drives out the 1st surface of the sheet. As for driving out, desirably, after the transfer tape was pasted, it is done, inside the field where the transfer tape is overlap, in order not to cut the reverse side material of the transfer tape, it is done. Coat below 2.0g/m2 is administered to the 1st aspect of the sheet which includes the label. Coat, from granular silica 50 consists of the proportion of 50 from 90 and poly vinyl alcohol 10 in dry weight. Display is printed to either of the 1st aspects of the sheet, or you can attach bar-code. The label leaves the reverse side material of the transfer tape, when the adhesive of the transfer tape is applied on label side, it is possible to remove simply. Until the piece of the transfer tape is cut off from the web, directing the adhesion surface outside with the vacuum cylinder, contacts with the web where that is moving, it is conveyed. The web, finally, individual or is formed to the business form which is continued. This business form may be many layer.