The subject innovation is in the beam carrier used for the heald frames and the beam carrier beam lifting device and a heald frame platform value preparing a fiber woven able to work w and fall by the hydraulic cylinder step of supplying the thread to the process after the device a beam about as the inside of the housing for (101) (101a) formed on both ends of the main body 1. in the platform (102), (102a) is formed in the platform (102), (102a), the upper part of the heald frame unit portion of and single housing a square at the bottom of the platform (102), (102a), but the hydraulic cylinder rod (4a) device at the bottom of the hydraulic cylinder 4 and the device coupled to the one housing bottom on both sides storage for (101) (101a) that is introduced to the inside the other end of the left or right feed to the lifting device shaft 201 allows that the sandwiching unit to the pair of lifts (2) and extending the axis lift device for receiving one side of a side coupling for operating board (3) and working units (3) device, the hydraulic cylinder rod (401a) and the hydraulic cylinder 401, the bottom is in a device in the body and the device, the hydraulic pump 6 to the body structure by installing a frame heald is lowered the heald frame guide 104 to the operator with a convenient working height of the platform (102) (102a) be the operation by lifting the working height, and the beam of the weight to lift the beam mounting through the beam to a portion is lowered to the parts of the ground by rolling the beam beam mounted and through the beam by operating the hydraulic cylinder 202 of the lift (2) this used to be that you can get easily attached to a handy carrier beam
展开▼