首页>
外国专利>
It is low, the United States tsubo print
It is low, the United States tsubo print
展开▼
机译:低,美国坪印刷
展开▼
页面导航
摘要
著录项
相似文献
摘要
PROBLEM TO BE SOLVED: To provide a printing paper having a basis weight as low as ≤30g/m2, especially of ≤28g/m2 and having excellent printability and bookbinding suitability.;SOLUTION: This printing paper having the basis weight as low as ≤30g/m2 satisfies the following conditions: (1) the air-permeability (JIS P 8117) is 50-400sec.; (2) the opacity (JIS P 8138) is ≥70%; (3) the WAX pick surface strength (JIS P 8129) is ≥5A; (4) the tensile strength (JIS P 8113) is ≥2.5kN/m; (5) the static friction coefficient of top-top, top-back and back-back surfaces (in conformity to JIS P 8147) are ≤0.60 each; and (6) the shrinkage ratio is ≤0.1%. The shrinkage ratio is determined by preparing a paper piece of 100mm wide and 1 m long along the flow direction of the paper in an atmosphere of 23°C and 50%RH, pulling the paper piece by uniformly applying a load of 2kg/100mm to an end of the long side, keeping the state for 1 week, removing the load and measuring the length after 1 hr.;COPYRIGHT: (C)2004,JPO
展开▼
机译:解决的问题:提供基重低至≤ 30g / m 2 Sup>,特别是≤ 28g / m 2 Sup>,并且具有优异的可印刷性的打印纸解决方案:该基纸低至≤ 30g / m 2 Sup>的打印纸满足以下条件:(1)透气度(JIS P 8117)为50- 400秒(2)不透明度(JIS P 8138)为70%以上; (3)WAX拨片的表面强度(JIS P 8129)为≥5A; (4)抗拉强度(JIS P 8113)为2.5kN / m。 (5)顶-顶,顶-后和后-背表面的静摩擦系数(符合JIS P 8147)分别为≤ 0.60; (6)收缩率为±0.1%。通过在23℃和50%RH的气氛中沿纸的流动方向制备100mm宽,1m长的纸片,并通过均匀地施加2kg / 100mm的负载来拉纸来确定收缩率。长边的末端,保持状态1周,移去负载并在1小时后测量长度;版权:(C)2004,JPO
展开▼