Method, system and article for rapid detection and avoidance of high data corrupting routes within a network

摘要

A receiving host in a TCP/IP network sends an acknowledgment indicating a received data packet is corrupt. The sending host will begin transmitting with a new field set in the IP header called a check-TCP-checksum bit, thereby requesting that all routers in the TCP/IP network perform a checksum on the entire received packet. Routers in the TCP/IP network will perform a complete checksum on an entire packet with the check-TCP-checksum bit set, and not just on the IP header. The routers continuously monitor the ratio of corrupt packets received on a particular port that fail the entire packet checksum to the total number of packets received on that port. If the ratio of corrupt-to-received packets exceeds a corruption threshold, the router assumes that the associated link is causing data corruption and issues a routing update indicating that the link is bad and should be avoided. Once the retransmission rate between the sender and receiver drops below a threshold level, the bad link has been detected and avoided within the TCP/IP network and the check-TCP-checksum option in the IP header is no longer set in data packets transmitted to the receiver host.