首页> 外国专利> corrosion-resistant austenitic stainless steel alloy cast steel and heat-resistant high-temperature strength has been improved

corrosion-resistant austenitic stainless steel alloy cast steel and heat-resistant high-temperature strength has been improved

机译:耐腐蚀奥氏体不锈钢合金铸钢和耐热高温强度得到提高

摘要

Nickel content is corrosion resistant austenitic stainless steel cast steel alloy and heat of less than about 15%. When the creep test as they were cast by the test conditions of ASTM E139, the alloy 10 -3 smaller minimum creep rate 1 × creep rupture life exceeding 3000 hours at a temperature of 750 ℃ and stress 100MPa I have a door. Also, This alloy has a 0.2% yield strength of more than 130MPa at 750 ℃ ​​as they were cast, the decrease in 0.2% yield strength of up to 900 ℃ from 750 ℃ ​​is smaller than 20% , I have a microstructure of a fully austenitic after casting.
机译:镍含量是耐腐蚀的奥氏体不锈钢铸钢合金,发热量小于约15%。当按照ASTM E139的测试条件进行蠕变试验时,合金10 -3 的最小蠕变速率小1×蠕变断裂寿命在750℃和应力100MPa I下超过3000小时有门此外,这种合金在铸造时在750℃时具有0.2%的屈服强度,大于130MPa,从750℃到900℃的0.2%屈服强度的降低小于20%,我有一个铸造后完全奥氏体的显微组织。

著录项

相似文献

  • 专利
  • 外文文献
  • 中文文献
获取专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号