首页> 外国专利> The device adaptable to the dental articulators of the types and no Arcon Arcon to allow movement of the models in the senses of anterior posterior, medial lateral, vertical and rotation

The device adaptable to the dental articulators of the types and no Arcon Arcon to allow movement of the models in the senses of anterior posterior, medial lateral, vertical and rotation

机译:该设备适用于这种类型的牙用咬合架,并且没有Arcon Arcon,以允许模型在前后,内侧,外侧,垂直和旋转的意义上运动

摘要

The device adaptable to the dental articulators of the types and no Arcon Arcon to allow movement of the modelosnos senses anterior posterior, medial lateral, vertical and rotation.Refers to this request to a device composed by a set of four disks (1,2,3,4) and three of them articulated through a plug-in system known as finger jointing, and these slots are scales (19,23) in mm.There is also a threadable button (6) which serves to fix the disk (2) together with the disc (1) in the lower branch of the articulator through a screw (29) embedded in the disc (2) by a screw (9) located in the posterior portion of the disk (2) and a screw (7) on the right side of the disc (3) for setting the desired movement.Two small studs (32) of plastic at the ends of these bolts (7,9) previously described to allow a better fixation without hurting the surfaces of portions of the type "male" fitting finger jointing of the disks (4) and (3) by a screw (30) of the type with head. For the fixation of the flat disk (4) in the wafer support of plaster model.A removable threaded bolts (12,13) for the fixing of the disc (1) to the lower branch of the articutador and bolts (8,14) located on the disc (4) for fixing the wafer on the disc (4), in order to always allow fitting of these records (1,4) on the same axis of insertion and trades Used together with three pairs of washers of different thicknesses, and a pair of 1.0 mm.Another with 2.0 mm. And the other with 3.0 mm.
机译:该设备适用于这种类型的牙用咬合器,并且没有Arcon Arcon以允许模型牙的运动感测前后,内侧,外侧,垂直和旋转。请参阅此请求,该设备由一组四个圆盘组成(1,2, 3,4),其中三个是通过称为指接的插入式系统进行铰接的,这些插槽的刻度尺(19,23)以毫米为单位。还有一个用于固定磁盘的螺纹按钮(6)(2 )与咬合架下部分支中的椎间盘(1)一起通过位于椎间盘(2)后部的螺钉(9)和螺钉(7)嵌入椎间盘(2)中的螺钉(29) )设置在圆盘(3)的右侧,以设置所需的运动。前面所述的这些螺栓(7,9)的端部有两个小的塑料螺柱(32),可实现更好的固定而又不伤及零件的表面通过带有头部的类型的螺钉(30)将“ 4”型和(3)型“公”型装配到手指上。用于将平面圆盘(4)固定在石膏模型的圆片支架中。可移动的螺纹螺栓(12,13),用于将圆盘(1)固定到节肢动物的下部分支和螺栓(8,14)位于磁盘(4)上以将晶片固定在磁盘(4)上,以便始终允许将这些记录(1,4)安装在同一插入轴上,并与三对不同厚度的垫圈一起使用和一对1.0毫米,另一个为2.0毫米。而另一个为3.0毫米。

著录项

相似文献

  • 专利
  • 外文文献
获取专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号