首页> 外国专利> DERMATOME FOR DECOMPOSITION OF THICK, FULL SPHERE, GRID EPIDERMIS TRANSLOCATED AUTO-DERMA-TRANSPLANTS WITH AN AREA MAGNIFICATION OF 1?5, 1?7, 1?8, 1?10

DERMATOME FOR DECOMPOSITION OF THICK, FULL SPHERE, GRID EPIDERMIS TRANSLOCATED AUTO-DERMA-TRANSPLANTS WITH AN AREA MAGNIFICATION OF 1?5, 1?7, 1?8, 1?10

机译:用于分解面积扩大为1?5、1?7、1?8、1?10的厚实,满球,网状表皮易位的自动真皮移植物

摘要

Dermatome for decomposition of thick, full sphere, grid epidermis translocated auto-derma-transplants with an area magnification of 1×5, 1×7, 1×8, 1×10 which consists of a right semicircle, left semicircle that careens to the left and right sides of the handle with an axis that freely rotates around its own axis and can oscillate along a channel of the handle, pedestal, arc handle which is attached to left bar, right bar, alternating relief technological plate with its working surface, which is motionlessly fixed on the semicircles, forming a half-cylinders, the blade holder with the flat blade, which is fixed to the left and right rods and its axle creates a conditional frame, the space between the working surface of a half-cylinder and a blade is regulated by mechanisms with a circle with the diameter of 0.1 mm to 5.0 mm, the working surface of the technological alternating plate relief comprises linear lugs over the entire length of the working surface 1.5 mm wide, the distance between them is 1.5 mm, the linear lugs as fragments 10.0 mm long with a step of 2.0 mm and 3.2 mm high. The first, third, fifth linear lugs begin from the leading edge of the technological plate, the second, fourth, sixth linear lugs in the form of fragments begin from a half of linear lugs of leading edge of technological plate and placed in the "checkerboard" manner. The working surface is made of a plastic mass. Linear lags are in the form of fragments 1×5 - 18.0 mm, 1 × 7 - 25.0 mm, 1 × 8 - 27.0 mm, 1 × 10 - 34.0 mm long.
机译:用于分解厚的,完整球体,网格表皮的易位皮肤真皮移位术,面积放大倍数为1×5、1×7、1×8、1×10,由右半圆,左半圆组成,并依托于手柄的左侧和右侧具有绕其自身轴线自由旋转的轴线,并且可以沿着手柄,底座,弧形手柄的通道摆动,该通道连接到左杆,右杆,交替浮雕工艺板及其工作表面,它固定地固定在半圆上,形成一个半圆柱,带有扁平刀片的刀架固定在左右杆上,其轴形成一个条件框架,即半圆柱的工作面之间的空间并通过直径为0.1毫米至5.0毫米的圆的机构来调节刀片,工艺交替板凸版的工作表面在整个工作表面的整个长度为1.5毫米,包括线性凸耳,距离为它们为1.5毫米,线性凸耳为碎片,长度为10.0毫米,台阶为2.0毫米,高度为3.2毫米。第一,第三,第五线性凸耳从工艺板的前缘开始,第二,第四,第六线性凸耳以碎片的形式从一半工艺钢板的前凸耳开始,并放置在“棋盘格”中”方式。工作表面由塑料制成。线性滞后的形式为碎片长1×5-18.0 mm,1×7-25.0 mm,1×8-27.0 mm,1×10-34.0 mm。

著录项

相似文献

  • 专利
获取专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号