Method for testing and assessment of the automobile safety systems, preferably for monitoring traffic events

摘要

way to check and assess the automotive safety systems, especially for monitoring road events, characterised by the fact that each checked the security system (1) are installed on the test bench, designed a mobile platform (2) mounted in a guide (6),driven by the propulsion system (3) and drives to the impact with a rigid obstacle (4) through a silencing element (5) attached to the movable platform (2) or a rigid obstacle (4), the test system security (1), depending on what conditions traffic is simulated, it is installed as a vehicle to which it is intended,what shall verify and evaluation in three successive stages, with: - in the first stage on the bench that hit head-on vehicle mounted safety system (1) and a rigid obstacle (4) at a speed corresponding to the collision of dr. ogowej, it's 10.20 km / h, then turns the movable platform (2) inside out, and repeats the test for the simulation of impact in the rear of the vehicle, at the same speed, then makes the stroke side of left and right vehicle after przemontowaniu + 90 degrees and - 90 degrees of the angle relative to the axis of the longitudinal movement of the movable j platform (2) at the same speed, during the trials,monitoring devices - recording (and transmission) transmitting data to the operator parameters, events and transmission parameters; - in the second stage makes on the bench hit head-on vehicle mounted safety system in a rigid obstacle ( 4) at the speed corresponding to the road accident is 50.120 km / h, then assembles and rotates the platform or the system inside out and repeat that attempt to strike in the rear of the vehicle at the same speed, then makes the stroke in the left and right side of the vehicle at obru00f3ceniu angle + 90 degrees and 90 degrees relative to the longitudinal axis of the moving platform - (2) at the same speed, whereby during attempts at this stage.monitoring devices - recording (and transmission) transmitting data to the operator parameters and parameters of transmission events, in addition in this stage are checked security systems,which have undergone positive verification in the first stage; the third stage - in assessing systems tested in previous stages of the calculation on the basis of measurements of the performance evaluation.