Method for producing panel of external wall elements absorbing solar energy for single or multi-family buildings

摘要

process for the production of external wall panel elements absorbing solar energy, for the construction of one or multi family of production backbone structure framework, preferably wooden and its mutual housing, characterized by thethat a skeleton structure imposed on the inner plastic paraizolacyjnu0105 about paroprzepuszczalnou015bci 3 - 6g / m2 / 24h thickness of 0.15 mm to 0.2 mm, after which the krawu0119dziaku00f3w skeleton attaches a good cement gipsowu0105 type fermacell, then prepared k onstrukcju0119 turns inside out and space between pillars is warmingpreferably in the form of mineral wool and a hull, favourably as plywood waterproof thickness of 12 - 20 mm, which is successively wiatroizolacju0119 favourably with paper bitumizowanego about paroprzepuszczalnou015bci 120 - 160 g / m2 / 24h and the net benefit of fiberglass, which if mechanical fittings to hull plates.after which assembles in the continuous polypropylene tubing diameter 16 - 20 mm arranged in the form sinusoid in distances between them ranging from 20 to 60 mm and attached handles.then a light concrete layer advantageously pianobetonu cemokrzempor composition binder / aggregate / foam technical proportionally and undergo maturation process at ambient temperature with humidity 80% minimum to obtain strength 2 mpa and evaporation of volatile s ubstancji, after which holds the heat insulation, preferably styrofoam ryflowany layer 120 mm,then requires grid under plaster and stucco requires first layer mineral.