Wall-mounted element-three-pane insulating glass window frame window plus roller shutters.

摘要

The wall-mounted element-three-pane insulating glass windows, frame windows and shutters are finished in a frame construction. The windows in residential buildings have opposite the exterior walls, insufficient heat-cold u. Soundproofing. Three-pane windows, frame windows u. Blinds result in improved U-ges. Values u. Soundproofing. The transp. Blinds in light unobtrusive apricot shade, has light transmission but also privacy and the advantage that, in strong sunlight sufficient light from the outside, enters the building. In the conventional, drawn on blind blinds, however, you still need light energy. With a low window sill, with the three-pane window an outside guardrail is not necessary. The often attached window-stem insect protection, is advantageous and spacious, on roller shutter box u. Three-pane windows built in between. If the three-disc window is closed, then cold air flow (13) in the roller shutter box is to be excluded as usual. Due to the Kompl.-installation, omitted from corner angle set for the plaster job, some work paths are saved. Burglar resistant element. The roller shutter armor (4) transp. in apricot coloring. The frame window (5) with two-pane edge-laminated glass. The insect screen m. Roller blind in the U-profile rail (8) is mounted in the roller shutter box at the bottom, on the outside. At the three-disc window (11) is the latching profile strip (10) u at the upper edge surface. the two tooth profile rails are perpendicular to the seitl. Edge surfaces (inside) attached. Two U-profile guide rails (9) on both sides with vertical punching (depending on window height) on the side of the leg. The 3-pane insulating glass window (11) is opened by the switching of the electric shaft drive motor (7) with two-sided pinion, which engage in the two toothed profile rails, for room ventilation and simultaneous insect protection u. closed. Alternatively m. Hydraulic pressure with the cleaning rubber lip (12), the window is partially cleaned when opening, and otherwise by disengaging the latching profile strip (10), manually with a peel-off window wiper. 1 The energy-saving window-wall-installation element is used in residential construction.